Systeme not stable

[Darack]

Hello dear LTT community!

 

I'm here becauce my pc is not stable since I build it last winter. It will froze regulary in game (bf5, anno 1800) or even using chrome. Does not freeze at idle so far. I'm able without issue to pass cinebench, but when I'm using prim95 it gave me an error after 2 or 3 minutes!.

 

also, xmp profile never work

 

Temperature is well under 60c when it crash

I set back all my setting to stock

try another set of memory stick

try the other memmory slot.

 

 

So far I'm still looking for my probleme

 

What would be your next step?

 

Here are my spec

 

Windows 10 pro 64bit

intel i5 9600k

ROG Maximus XI hero (wi-fi) bios 1302

16G g.skill tridentz memory

Evga super nova g2 750W

WD nvme black 500gb

Evga gtx 1070 black edition

 

Thanks!

 

 

[Streetguru]

34 minutes ago, Darack said:

Hello dear LTT community!

Do you have another power supply to test with?

Is it able to run fur mark on the GPU or stress the GPU without issue?

You can try underclocking your CPU, if it fails on Prime95 it's probably just a bad CPU/memory or memory controller. But it should handle default memory speeds without an issue.

[Darack]

24 minutes ago, Streetguru said:

Do you have another power supply to test with?

Is it able to run fur mark on the GPU or stress the GPU without issue?

You can try underclocking your CPU, if it fails on Prime95 it's probably just a bad CPU/memory or memory controller. But it should handle default memory speeds without an issue.

I've done 3 pass on fur mark back to back without issue! 

My ram is currently running at 2133mhz, well under spec! (this is a 4266mhz kit)

cpu runing at it stock speed for now, gonna try to under clock it tomorow night!

after that I will try another psu as soon as I can!

Thanks of your respond! If you have any other idea I'm really open to try it! I miss my old 2600k so much right now!

[Streetguru]

19 minutes ago, Darack said:

I've done 3 pass on fur mark back to back without issue!

If the PSU can run furmark on the GPU, then it's most likely the CPU or Motherboard, would be helpful if you had a local PC shop you could swap a CPU with for testing, could try sending it in under warranty or something.
 

[Darack]

I will try the psu just to be safe. Worse case scenario I will buy a cheap cpu an test the board with it. After that I guess I will have to email asus support. 

 

Thanks a lot for your time!

[Darack]

Stupid question,

 

I have another 750w psu, but he only have a 8 pin for the cpu, should be enought for my 9600k?

 

Thanks

[Darack]

Update:

 

Asus as replace my motherboard, now it is better but still have error on prime95. it look to be my graphic card or my hold samsung ssd