PC Lags

[Mantvislt3]

Hi guys, I'm new here so can you help me guys. My PC lags very that I can't browse in internet. Drivers are latest and Windows 7 not old enough (1 mounth old). Yesterday with my old hdd (150gb 1.5GB/s) tried to install Windows, at first run smooth no lag but after I installed drivers it started to lag. Tried defrag hdd, find bad sectors, tweak and everything that I could find in Internet. I will attach Speccy snapshot, because you guys are better troubleshooter than me . And sorry bad at English.
Motherboard - P7H55/usb3, Graphics card - GTX 560Ti, Ram - 8gb ADATA, HDD - 2TB WD Red.

MANTVIS-PC.txt

[totally not keh-jeff]

This may sound like a dick post, but maybe your PC is crap. What are your specs?

[Guest]

Hi guys, I'm new here so can you help me guys. My PC lags very that I can't browse in internet. Drivers are latest and Windows 7 not old enough (1 mounth old). Yesterday with my old hdd (150gb 1.5GB/s) tried to install Windows, at first run smooth no lag but after I installed drivers it started to lag. Tried defrag hdd, find bad sectors, tweak and everything that I could find in Internet. I will attach Speccy snapshot, because you guys are better troubleshooter than me .

Specs

[legopc]

what cind of lag... 

[legopc]

This may sound like a dick post, but maybe your PC is crap. What are your specs?

pc crap... realy thats just stupid and the specs are in the document that he posted 

[Mantvislt3]

How I can say... Just turned on pc after skype goes online it's starts to lag Chrome turns in ~30sec, My computer - ~15sec. And forgot to say search index is turned off If it say's something for you guys.

[Ciccioo]

which driver made it lag? can you uninstall it?

[Mantvislt3]

I dont know. I install few of them at first boot like Graphics, chipset, usb3 host, Intel rapid storage (I thinks its only for AHCI), and VIA sound. Internet drivers i'm not installing because without drivers I have internet  

[Ciccioo]

as you said that is started having those problems just after having installed the drivers, you should try to ged rid of them one by one and see when it gets better

[Mantvislt3]

Maybe It may cause Partition managing like making another partition and then merge it again?

[Ciccioo]

i don't think that's a problem

 

can't you try uninstalling the drivers?

[Mantvislt3]

only few off them like Nvidia, realtek and Via

[Hotzskyz]

try to end some task in taskmanger

[Mantvislt3]

There's nothing too much that I can end task's everything is importart like svchost.exe and etc. and cpu usage is 20% ram - 34%

[Markmjb]

Below is your motherboard. Did you put your graphics card in the PCIEX16_1 slot or any other ?(it should be the top blue one )

The manual of your motherboard states your graphics card should be placed there for optimal performance.

If I read it right,  Speccy shows the only PCI slot in use is the PCIEX1_1 , the small one below the PCI-slot recommended for it. That would be throttling your gpu.

 

 

[Mantvislt3]

PCIEX16_1 There is GPU in PCIEX16_2 Soundblaster. In PCIEX16_2 Gpu will work little bit slower

[Ciccioo]

if that processor is at 20%, it might be a whole single core at 100% utilization, check what process is using the most CPU in the task manager

[Rhino2112000]

Go to geek squad and get your computer cleaned or get a PC cleaning program

[Mantvislt3]

CPU's doing alright all cores working. most using proccess is chrome, utorrent and skype

[Ciccioo]

CPU's doing alright all cores working. most using proccess is chrome, utorrent and skype

how much CPU? report the percentage for chrome, utorrent and skype please

[Mantvislt3]

Go to geek squad and get your computer cleaned or get a PC cleaning program

I have some off cleaning programs and they don't solve my problem. ,,Geek squad" in Lithuania not much of them

[Mantvislt3]

All Cpu cores 15% at this moment. Each core percent I dont know how to watch

[Markmjb]

 

PCIEX16_1 There is GPU in PCIEX16_2 Soundblaster. In PCIEX16_2 Gpu will work little bit slower

The speccy log shows something else. I checked with my own slightly newer motherboard, and it still shows "in use" when you use a PCI slot, so if you use  X16_1 and X16_2, why is only X1_1 showing as in use in the PCI data below: 

Slot PCI-E

Slot Type PCI-E

Slot Usage Available

Bus Width 32 bit

Slot Designation PCIEX16_1

Characteristics 3.3V, Shared, PME

Slot Number 0

Slot PCI-E

Slot Type PCI-E

Slot Usage In Use

Bus Width 32 bit

Slot Designation PCIEX1_1

Characteristics 3.3V, Shared, PME

Slot Number 1

Slot PCI-E

Slot Type PCI-E

Slot Usage Available

Bus Width 32 bit

Slot Designation PCIEX1_2

Characteristics 3.3V, Shared, PME

Slot Number 2

Slot PCI-E

Slot Type PCI-E

Slot Usage Available

Bus Width 32 bit

Slot Designation PCIEX16_2

Characteristics 3.3V, Shared, PME

Slot Number 3

Slot PCI

Slot Type PCI

Slot Usage Available

Bus Width 32 bit

Slot Designation PCI1

Characteristics 3.3V, Shared, PME

Slot Number 4

Slot PCI

Slot Type PCI

Slot Usage Available

Bus Width 32 bit

Slot Designation PCI2

Characteristics 3.3V, Shared, PME

Slot Number 5

 

[Ciccioo]

All Cpu cores 15% at this moment. Each core percent I dont know how to watch

in the "processes" tab of the task manager it shows the discrete percentages

anyway 15% looks fine, i don't think that's the reason of the "lag"

[Mantvislt3]

But my Physical Memory is 47%