Jump to content

Should I Use "push, Pull, Or Push/pull"

AMD Lover
 Share
Posted

I have a Corsair H100i and i was wondering, right now i have them in push blowing air out of the case. I've ordered some SP120's from Corsair but what would be the best way to orient them on the rad.

Work Desktop | CPU: Intel Core i7 4770k | GPU: Quadro K1200 | Motherboard: EVGA Z97 Classified | RAM: Corsair Dominator Platinum 32GB (4x8GB) DDR3-2133Mhz | PSU: Seasonic 750W SS-750KM3 80 PLUS Gold | STORAGE: WD 1TB Se Enterprise Grade Drive & Corsair Neutron NX500 400GB NVMe PCIe  | COOLER: Enermax Liqtech 240 -  5x Noctua NF-F12 iPPC 2000 PWM | CASE: Corsair 600C | OS: Windows 10 Pro | Peripherals: Logitech MX Master 2S -- Logitech K840 -- INTEL X520 10Gb NIC -- 3x Acer H236HL -- Build Log | 

 

Work Server | CPU: Intel Xeon E5-2650 v3 | Model: Cisco UCS C220 M4 (SFF) | RAM: 64GB (4x16GB) Cisco (Samsung) DDR4 2133Mhz | STORAGE: 4x Cisco (Seagate) 900GB 10K 2.5" (RAID 10) - 2x 32GB Cisco FlexFlash Boot Drive (RAID 1) | OS: vSphere 6.7 Enterprise Plus U3 | 

 

Laptop | CPU: Intel Core i7 6700HQ | GPU: Nvidia GTX 960M 2GB GDDR5 | RAM: 32GB (2 x 16GB) DDR4-2400Mhz | STORAGE: 512GB Hynix NVMe | OS: Windows 10 Pro |

 

Gaming Desktop | CPU: Intel Core i7 9700K | GPU: Gigabyte RTX 2080 WINDFORCE 8G  | Motherboard: ASRock Z390 PHANTOM GAMING-ITX | RAM: Ballistix Elite 32GB Kit (16GB x 2) DDR4-3000 | PSU: Silverstone SX700-LPT 700w 80 PLUS Platinum | STORAGE: 2x Samsung 970 PRO 1TB NVMe | COOLER: Noctua NH-L12 | CASE: Louqe Ghost S1 | OS: Windows 10 Pro | Build Log in Progress | 

 

Home Server | CPU: Intel Xeon E5-2690 (Sandy Bridge) | GPU: Quadro P2000 | Motherboard: SUPERMICRO X9SRL-F  | RAM: 64GB (8x8GB) Micron VLP DDR3-1600 ECC | PSU: SUPERMICRO 665W 80 PLUS Bronze | STORAGE: 2x Samsung 860 EVO 500GB (RAID 1) - 4x WD 8TB Ultrastar (RAID 10) - Intel SSD D3-S4510 Series 240GB (BOOT)  | COOLER: Noctua NH-U12DXi4 with 2x Noctua NF-F12 iPPC 3000 PWM | CASE: SUPERMICRO CSE-842TQ-665B 4U | OS: vSphere 6.7 Enterprise Plus U3 | Build Log in Progress |

 

| Pixel 4XL 128GB - Clearly White - Unlocked - Carrier: Visible |

 

| F@H STATS |

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

It doesn't matter performance wise between push and pull. Push/pull will have a little more performance but it won't be too much. Linus and many people prefer pull as it is much easier to clean the dust off a radiator.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Depends on your rad and fans but in most cases, won't make an inkling of a difference.  Most people do one or the other for looks or like Shikarikato said for ease of maintenance.

Current Rig
AMD Ryzen 5900X - Asus ROG Strix X570-E Gaming WiFi 2 - 32 GB GSkill TridentZ RGB
GeForce RTX 3080 - WD Black SN850 1TB  - Lian Li O11 Dynamic XL

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

one thing I noticed going from the OE H100 fans to SP120PE was that the noise level was

quieter, but he temps did rise a lil by 2°-3°, ran the SP120PE on 7volt and a lot quieter and

temps still respectably cool 5°-8° warmer. SP120QE were a lot warmer 9°-12°. and they will

not work with the H100 controller.

 

orientation is a non-issue, for maintenance pull is best.

 

airdeano

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Pull, You get a lot of dust between the fans and the radiator if you do push and push/pull is not that much better performance 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

one thing I noticed going from the OE H100 fans to SP120PE was that the noise level was

quieter, but he temps did rise a lil by 2°-3°, ran the SP120PE on 7volt and a lot quieter and

temps still respectably cool 5°-8° warmer. SP120QE were a lot warmer 9°-12°. and they will

not work with the H100 controller.

Afaik the oe fans are modified to be higher speed so the cooler performs better in benchmarks.

Feel free to PM for any water-cooling questions. Check out my profile for more ways to contact me.

 

Add me to your circles on Google+ here or you can follow me on twitter @deadfire19.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

No performance difference. Push-pull only makes a difference on really thick/dense radiators. Pull for better maintenance. Otherwise, go with whatever looks best.

Desktop: Intel Core i7-5820K, Corsair H115i, Asus X99-Deluxe/USB 3.1, G.Skill Ripjaws4 32GB 2800MHz CL16, Zotac RTX 3070, Samsung 950 Pro 512GB in Angelbird Wings PX1, Samsung 850 EVO 1TB, 5*Seagate 12TB, Cooler Master V1200, Phanteks Enthoo Luxe, Windows 10 Pro. Phillips 328P6VUBREB, Corsair Vengeance K95 RGB Cherry MX Brown, Logitech G502 X Plus, Sennheiser HD700.

 

AYANEO 2S: AMD 7800U, 32GB 7500MHz, 2TB WD SN850X. Windows 11.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

No performance difference. Push-pull only makes a difference on really thick/dense radiators. Pull for better maintenance. Otherwise, go with whatever looks best.

Push/pull means you can get the same performance at lower fan speeds; which is quieter.

Feel free to PM for any water-cooling questions. Check out my profile for more ways to contact me.

 

Add me to your circles on Google+ here or you can follow me on twitter @deadfire19.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×