Any tips for my WS?

[gb1995]

Hello,

 

We are a 3D Scanning company, and we recently purchased a pc. We've been supplied the best hardware specs from the maker of our software and I was hoping if you guys have some tips. Either Hardware adjusments or BIOS settings. Im not a total noob when it comes to pc's but iam not very familiar with all the BIOS settings and stuff. I've heard some setting which would boost the RAM for example. See the specs below.

 

CASE	PCS SR-620C BEHUIZING - MID TOWER
CPU	Intel® Core™ i9-9900K with 8 cores (3,60 GHz @ max 4,9 GHz)
MOTHERBOARD	ASUS® PRIME Z390-P: ATX, LG1151, USB 3.1, SATA 6 GBs
RAM	64 GB Corsair VENGEANCE RGB PRO DDR4 3000 MHz (4 x 16 GB)
GPU	11 GB NVIDIA GEFORCE RTX 2080 Ti
STORAGE	1 TB INTEL® 760p M.2 NVMe PCIe SSD (MAX 3230 MB/sR | 1625 MB/sW)
PSU	CORSAIR 650 W TXm SERIES™ SEMI-MODULAR 80 PLUS® GOLD
CPU COOLER	Corsair H115i PRO Hydro-serie

 

Thanks alot!

[Stormseeker9]

You could Manully OC the CPU to about 5ghz - but if running stock intel cooler than please don’t. Won’t be enough to keep it cool. Is there an aftermarket cooler installed?

 

Make sure the ram is set to 3000mhz in the bios and not stock 2133mhz 

[m777y]

find xmp profile guide on google/use oc manual tutorial.

[gb1995]

37 minutes ago, Stormseeker9 said:

You could Manully OC the CPU to about 5ghz - but if running stock intel cooler than please don’t. Won’t be enough to keep it cool. Is there an aftermarket cooler installed?

 

Make sure the ram is set to 3000mhz in the bios and not stock 2133mhz 

Thanks for your information! Yea. Its at the bottom of the list. Its a

Corsair H115i PRO Hydro-serie

[Stormseeker9]

13 minutes ago, gb1995 said:

Thanks for your information! Yea. Its at the bottom of the list. Its a

Corsair H115i PRO Hydro-serie

Sorry, my bad. Eyes are letting me down haha.

 

yes that cooler is sufficient enough. I think for l your cpu there is an option to enable 5ghz OC from the bios. Not entirely sure but if memory serves me well. Otherwise manually tinker

[gb1995]

7 minutes ago, Stormseeker9 said:

Sorry, my bad. Eyes are letting me down haha.

 

yes that cooler is sufficient enough. I think for l your cpu there is an option to enable 5ghz OC from the bios. Not entirely sure but if memory serves me well. Otherwise manually tinker

No problem! Thanks for the info! will post the results once i receive the machine

[gb1995]

@Stormseeker9 I've read some stuff on the internet about z370 boards not being able to handle i9900k's. Is this true?

[Stormseeker9]

3 minutes ago, gb1995 said:

@Stormseeker9 I've read some stuff on the internet about z370 boards not being able to handle i9900k's. Is this true?

To be fair.. z390P is a poor board for that cpu.

 

a WS pro or WS sage or a higher end Taichi / EVGA would be better for your use case. 

[gb1995]

5 hours ago, Stormseeker9 said:

To be fair.. z390P is a poor board for that cpu.

 

a WS pro or WS sage or a higher end Taichi / EVGA would be better for your use case. 

I see. But it wouldn't damage the board right?

[Stormseeker9]

22 minutes ago, gb1995 said:

I see. But it wouldn't damage the board right?

Its more can u utilise the full potential of your cpu.. 

[gb1995]

9 hours ago, Stormseeker9 said:

Its more can u utilise the full potential of your cpu.. 

Ah I see. I can pick 1 out of these. Which one would you recommend and why?

 

 

[Stormseeker9]

1 hour ago, gb1995 said:

Ah I see. I can pick 1 out of these. Which one would you recommend and why?

 

 

Grab a aurus pro or master. You for sure can run the 5ghz OC without issues and temps will stay in check. Overall much higher and better quality board. All the components being used on it etc.

 

and doing 3D scanning work wise I would invest into the pc so it won’t break down in the short term

[gb1995]

@Stormseeker9

 

Just upgraded it to the Aorus Pro! It also has more upgradability in the future. E.g. a second graphicscard etc.

Thanks for your support! Will show some pics when we receive the pc.

[Stormseeker9]

1 hour ago, gb1995 said:

@Stormseeker9

 

Just upgraded it to the Aorus Pro! It also has more upgradability in the future. E.g. a second graphicscard etc.

Thanks for your support! Will show some pics when we receive the pc.

nice!