ryzen Urgent: System not booting while upgrading

[Saajan]

Hi, I Was going to update my system to 1500x to 2700x but ran into some problems, After installing CPU System is not booting & Cpu fan not running at all. Motherboard and Graphic Card has power. I tried to switch back to 1500x But nothing same things. I have checked Both cpu pins there are ok. I have to point out i was using cheap thermal paste(white one, it was really sticky) First time as my thermal paste Which I ordered was not arrived. I have tried Clear cmos via shorting jumper, Changing Cpu fan header to different header.

 

Config:

Motherboard: Asus Prime B350 plus

Processor: 1500x,2700x

Power Suplly: antec 500 watt 

Ram: corsair venagence lpx 8GB X 2

Graphic card: asus 1070 strix

[TheKDub]

Double check that all your connections are secure and that your PSU is plugged in and switched on.

[Metallus97]

1 minute ago, TheKDub said:

Double check that all your connections are secure and that your PSU is plugged in and switched on.

This and try this with the old CPU, then update BIOS, then try the new one again.

[Saajan]

I have checked all connections already, Psu is plugged in and on, that why motherboard and graphic card has power. I haven't reseated the ram and have pulled out the battery to clear cmos,(have tried the jumper method but not luck) these are the things i do know may work.

[Metallus97]

1 minute ago, Saajan said:

I have checked all connections already, Psu is plugged in and on, that why motherboard and graphic card has power. I haven't reseated the ram and have pulled out the battery to clear cmos,(have tried the jumper method but not luck) these are the things i do know may work.

hm,... then please try to reseat ram and check wether all the cables are plugged in correctly etc

[Saajan]

13 minutes ago, Metallus97 said:

This and try this with the old CPU, then update BIOS, then try the new one again.

Already tried with old cpu(1500x) as i said in original post. Bios was already update 2 3 months ago that support 2000 series cpu's

[Saajan]

bump

[Saajan]

Bump

[Metallus97]

Chill dude, to much bumping is also not the right way. But I get you. I am trying to help. But at this pint, and assuming you did the recommended steps correctly, we have to assume a defective part. Do you have other stuf to test with?

[Saajan]

sorry, for this,

By the way i pulled the cmos battery out for two hours, PC Boots with 1500x Now. Thanks. 

I Will Update with 2700x.

[Metallus97]

1 minute ago, Saajan said:

sorry, for this,

By the way i pulled the cmos battery out for two hours, PC Boots with 1500x Now. Thanks. 

I Will Update with 2700x.

Roger that! Remember to update your Bios first and please mark this thread as solved!

[Saajan]

43 minutes ago, Metallus97 said:

Roger that! Remember to update your Bios first and please mark this thread as solved!

Hi, Bro i have one more question i got little bit thermal paste on  3 or 4 pins at the side. Can my cpu be dead because of this or it will keep my cpu from  working properly. Should I clean it with 99.9 % isopropyl alochol .

[Metallus97]

55 minutes ago, Saajan said:

Hi, Bro i have one more question i got little bit thermal paste on  3 or 4 pins at the side. Can my cpu be dead because of this or it will keep my cpu from  working properly. Should I clean it with 99.9 % isopropyl alochol .

This could isolate the pin and possibly destroy the socket. clean it with some isopropyl and a (SOFT!!) toothbrush or something like that. be CAREFUL not to bend the pins.

[Saajan]

11 hours ago, Metallus97 said:

This could isolate the pin and possibly destroy the socket. clean it with some isopropyl and a (SOFT!!) toothbrush or something like that. be CAREFUL not to bend the pins.

How much Time should I give the cpu Before installing it so that Isopropyl alcohol is evaporated.

[Metallus97]

3 hours ago, Saajan said:

How much Time should I give the cpu Before installing it so that Isopropyl alcohol is evaporated.

Like 1min 

you should also be able to see that 

[Saajan]

19 hours ago, Metallus97 said:

Like 1min 

you should also be able to see that 

Thanks man, PC boots fine with 2700x, Have  further questions but this thread is already too long will open new thread