Jump to content

It didnt trn on at first(i died) but then after trouble shooting power cable/p- p+ etc, it turns on fans spin mobo lights up it all good right, wrong my monitor gets no signal 

 

Is this a boot issue or has my gpu decided to die on the one day i didnt want it to or it could be ram

 

My specs is

 

ryzen 3600

nzxt h500

550w tx psu

ddr4 8gb 2400mhz

1tb hard drive 

250gb ssd

gtx 1050ti

 

Link to comment
https://linustechtips.com/topic/1086423-so-i-built-a-new-pc/
Share on other sites

Link to post
Share on other sites

Is your monitor plugged into the graphics card?  The video out ports on motherboard won't work with that CPU.  

Ryzen 2600 - Sapphire Pulse Vega 56 - Corsair Vengeance LED DDR4 3000 C15 2x8GB - Corsair Force MP500 NVMe PCIe M.2 240GB - 2x Seagate Barracuda 2TB - 

AsRock B450 PRO4 - Deepcool Earlkase Case -  Seasonic Foucus+ 650

Link to comment
https://linustechtips.com/topic/1086423-so-i-built-a-new-pc/#findComment-12749895
Share on other sites

Link to post
Share on other sites

A B450 board will need to be flashed with the latest BIOS in order for the latest Ryzen 3000's CPU's to work.   MSI has a Flashback feature on that board so it can be updated without a CPU.  Check manual for steps if this wasn't done yet.  

 

Edit: https://forum-en.msi.com/index.php?topic=320766.0

Ryzen 2600 - Sapphire Pulse Vega 56 - Corsair Vengeance LED DDR4 3000 C15 2x8GB - Corsair Force MP500 NVMe PCIe M.2 240GB - 2x Seagate Barracuda 2TB - 

AsRock B450 PRO4 - Deepcool Earlkase Case -  Seasonic Foucus+ 650

Link to comment
https://linustechtips.com/topic/1086423-so-i-built-a-new-pc/#findComment-12749913
Share on other sites

Link to post
Share on other sites

There is no bad lights for the cpu on the mobo and from what i can tell from the mobo lights it posts but i cant get any signal from my monitor and its not a faulty monitor because i use with my ps4 and i have tried 2 hdmi cables which work fine

Link to comment
https://linustechtips.com/topic/1086423-so-i-built-a-new-pc/#findComment-12749921
Share on other sites

Link to post
Share on other sites

Do you have a single 8GB stick of RAM?  If so, make sure it is in DIMMA2.   If dual channel DIMMB2 and DIMMA2.  If those don't work you could try and a single stick in each slot to see if that gets you any further ahead.   

Ryzen 2600 - Sapphire Pulse Vega 56 - Corsair Vengeance LED DDR4 3000 C15 2x8GB - Corsair Force MP500 NVMe PCIe M.2 240GB - 2x Seagate Barracuda 2TB - 

AsRock B450 PRO4 - Deepcool Earlkase Case -  Seasonic Foucus+ 650

Link to comment
https://linustechtips.com/topic/1086423-so-i-built-a-new-pc/#findComment-12749928
Share on other sites

Link to post
Share on other sites

And everything went smooth with the Flashback? The LED lit up like in this video? 

 

 

I'm out of ideas otherwise.  Hopefully others can offer some help.  

 

Ryzen 2600 - Sapphire Pulse Vega 56 - Corsair Vengeance LED DDR4 3000 C15 2x8GB - Corsair Force MP500 NVMe PCIe M.2 240GB - 2x Seagate Barracuda 2TB - 

AsRock B450 PRO4 - Deepcool Earlkase Case -  Seasonic Foucus+ 650

Link to comment
https://linustechtips.com/topic/1086423-so-i-built-a-new-pc/#findComment-12749986
Share on other sites

Link to post
Share on other sites

For the first boot on Ryzen it might, or should power cycle a few times while it detects memory timings, at least that is my understanding of why it does this.  So if it appears to reset itself or no signal initially that is normal but that only takes a minute or so. 

Ryzen 2600 - Sapphire Pulse Vega 56 - Corsair Vengeance LED DDR4 3000 C15 2x8GB - Corsair Force MP500 NVMe PCIe M.2 240GB - 2x Seagate Barracuda 2TB - 

AsRock B450 PRO4 - Deepcool Earlkase Case -  Seasonic Foucus+ 650

Link to comment
https://linustechtips.com/topic/1086423-so-i-built-a-new-pc/#findComment-12750005
Share on other sites

Link to post
Share on other sites

7 minutes ago, CrazieChipmunk said:

OH  might want to try it again then because i thoguht it was meant to happen instantly whoops, also mine wasnt power cycling is that a bad sign

Not necessarily sure if that means a bad thing.  Obviously something isn't working right.  My guess would be BIOS issue or wonder if it's not liking the stick of RAM.  I've only heard the latest ryzen CPU'S have great memeory support so I wouldn't think so but you never know.  If you know the exact model of RAM you have, you could search online to see if you can find an example of someone else successfully has it working.  

Ryzen 2600 - Sapphire Pulse Vega 56 - Corsair Vengeance LED DDR4 3000 C15 2x8GB - Corsair Force MP500 NVMe PCIe M.2 240GB - 2x Seagate Barracuda 2TB - 

AsRock B450 PRO4 - Deepcool Earlkase Case -  Seasonic Foucus+ 650

Link to comment
https://linustechtips.com/topic/1086423-so-i-built-a-new-pc/#findComment-12750049
Share on other sites

Link to post
Share on other sites

Ryzen 2600 - Sapphire Pulse Vega 56 - Corsair Vengeance LED DDR4 3000 C15 2x8GB - Corsair Force MP500 NVMe PCIe M.2 240GB - 2x Seagate Barracuda 2TB - 

AsRock B450 PRO4 - Deepcool Earlkase Case -  Seasonic Foucus+ 650

Link to comment
https://linustechtips.com/topic/1086423-so-i-built-a-new-pc/#findComment-12750063
Share on other sites

Link to post
Share on other sites

From that thread I just posted: A couple people on Reddit have the Tomahawk b450 + Ryzen 3000 and what worked for them is to first use flashback for V17, THEN do the update with V18. I'm waiting for my 3700x or else I would try it.

Ryzen 2600 - Sapphire Pulse Vega 56 - Corsair Vengeance LED DDR4 3000 C15 2x8GB - Corsair Force MP500 NVMe PCIe M.2 240GB - 2x Seagate Barracuda 2TB - 

AsRock B450 PRO4 - Deepcool Earlkase Case -  Seasonic Foucus+ 650

Link to comment
https://linustechtips.com/topic/1086423-so-i-built-a-new-pc/#findComment-12750067
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×