Black screen after installing new gpu.

[Kaziek]

So yep, I had gtx 1080 from Asus inside my computer, I removed it and installed new one. After doing so, I only have black screen that's why I removed it and installed old one but black screen remained, I removed old one and left it without then tried to turn it on... To see black screen. Could you somehow help me? 

Motherboard: z370-f 

 

[driftz240]

Is it booting into the bios?

[Caennanu]

Do you have your monitor hooked up to the port of the VGA card or to the port of the mainboard?

 

[Akira Shimazu]

Yeah i think its postive that you havent connect the HDMI to VGA cards

[Kaziek]

9 minutes ago, Caennanu said:

Do you have your monitor hooked up to the port of the VGA card or to the port of the mainboard?

 

To the VGA card

[Kaziek]

8 minutes ago, Wolfycapt said:

Yeah i think its postive that you havent connect the HDMI to VGA cards

No, it's plugged 

[Kaziek]

17 minutes ago, driftz240 said:

Is it booting into the bios?

Welp, I cannot see anything, it just gives me black screen on HDMI. 

I can also add that on old gpu fans now stop after around 5 seconds. 

[driftz240]

1 minute ago, Kaziek said:

Welp, I cannot see anything, it just gives me black screen on HDMI. 

I can also add that on old gpu fans now stops after around 5 seconds. 

uhhh... Idk try clearing the cmos ¯\_(ツ)_/¯

[Akira Shimazu]

4 minutes ago, Kaziek said:

No, it's plugged 

mostly because cable connection if it wont show up anything and leave it blank screen. check again. if ts not check MOBO

[Caennanu]

With a VGA card connected properly, you should atleast see Bios, even when forgetting to add the powerplugs (iirc, might be different nowadays).

If you plug it into the slot on the mainboard, does that give you an image?

Have you remembered to plug in the power connections to the video card?

Have you installed it in the top slot?

Does the mainboard debugled say anything?

 

Or perhaps, you have your monitor forced to an input and you switched cables?

 

 

[Kaziek]

4 minutes ago, driftz240 said:

uhhh... Idk try clearing the cmos ¯\_(ツ)_/¯

Maybe a little dumb question but how do I do that? 

[Kaziek]

8 minutes ago, Caennanu said:

With a VGA card connected properly, you should atleast see Bios, even when forgetting to add the powerplugs (iirc, might be different nowadays).

If you plug it into the slot on the mainboard, does that give you an image?

Have you remembered to plug in the power connections to the video card?

Have you installed it in the top slot?

Does the mainboard debugled say anything?

 

Or perhaps, you have your monitor forced to an input and you switched cables?

 

 

It doesn't give me any image, it's just black screen, that doesn't even give me "no signal info". 

Yep, these are plugged. 

Yep, top slot. 

Cannot really say anything about the question with mainboard cuz I cannot see anything. 

I don't think it's cable problem. 

[Kaziek]

43 minutes ago, driftz240 said:

uhhh... Idk try clearing the cmos ¯\_(ツ)_/¯

OH boy, I cleared it and tried to turn it on without gpu, I've got Bios screen, what next? 

[driftz240]

32 minutes ago, Kaziek said:

OH boy, I cleared it and tried to turn it on without gpu, I've got Bios screen, what next? 

umm... install your gpu and see if you get in the bios

[Kaziek]

So yeah, everything is done now, thanks for help. 

BTW. I turned off Intel graphic in device manager, do I have to turn it back on?