350D

[KrutoyEegrok]

Will the corsair 350D fit a radiator in push/pull at the top with this motherboard?

 

http://www.newegg.com/Product/Product.aspx?Item=N82E16813130737

[nsyedhasan]

Yes, it should but I wouldn't recommend push pull with a H100i if that was what you were considering.

[SAV1OUR]

it should 

[KrutoyEegrok]

Yes, it should but I wouldn't recommend push pull with a H100i if that was what you were considering.

Why not? and What AIO cooler would you recommend for push pull?

[nsyedhasan]

Why not? and What AIO cooler would you recommend for push pull?

For the reason why, the H100i is a thing rad so the extra static pressure won't help much. Also the H220 if you can afford it and don't add any fans.

[Aleks]

Yea, pushpull on the h100i wont make the biggest difference. It would help a lot on thicker rads as a pose to thinner rads on the h100i

[Tmh85]

Why not? and What AIO cooler would you recommend for push pull?

Barely that much if any at all temperature improvment

[Squabba]

That probably won't fit

[airdeano]

Will the corsair 350D fit a radiator in push/pull at the top with this motherboard?

 

http://www.newegg.com/Product/Product.aspx?Item=N82E16813130737

 

no, the 350D can not support push/pull with the H100/i.

just not enough room for MOSFET/RAM 'sinks and rad/fans

 

 

if you were you offset install (new holes) and depending on board used, you might

be able, but rather than push/pull, use more radiator (less noise, cooler temps)

[TheProfosist]

I would go H110 o and single fan oly fits and I would put on top of the rad for easy cleaning and mounting