aorus 2080 waterblock high temps

[donedeard]

Hi

 

A while ago I got http://www.phanteks.com/PH-GB2080TiGB.html block from Phanteks temperatures ware bad from first installation so I Emailed Phanteks and they retested block and send me new thermal pads 0.5mm insted of 1mm thick.

After that temps ware great for a while ~~62C @2085 clock i was happy with that. after 2 weeks this is not longer a thing gpu goes up to 72C and downclocks to 1860. water temp is arround 30-32C after 2-3 hours of gaming, no problem there.

 

Any ideas anyone?

[TheBean]

proper thermal application? which thermal paste? screwed in everything properly? water not leaking? pump working correctly? cpu loop combined or separate?

[Rune]

39 minutes ago, donedeard said:

Hi

 

A while ago I got http://www.phanteks.com/PH-GB2080TiGB.html block from Phanteks temperatures ware bad from first installation so I Emailed Phanteks and they retested block and send me new thermal pads 0.5mm insted of 1mm thick.

After that temps ware great for a while ~~62C @2085 clock i was happy with that. after 2 weeks this is not longer a thing gpu goes up to 72C and downclocks to 1860. water temp is arround 30-32C after 2-3 hours of gaming, no problem there.

 

Any ideas anyone?

Er....62c isn't good either. On water ideally you should be under 50c at most. I have a heavily OC'd ftw3 with higher TDP and I rarely get above 45...hm.

[donedeard]

1 minute ago, Saksham said:

proper thermal application? which thermal paste? screwed in everything properly? water not leaking? pump working correctly? cpu loop combined or separate?

Single cpu and GPU loop.

TG Krayonaut aplication is fine.

No leeks.

Loop is fine CPU temps where I expect them to be 50-60c