Help!!!

[IOU]

So I just bought a rx 570 saphire. It is a second hand thou. My problem is when i connect my gpu to my monitor it has no signal.. but when I remove the gpu and directly connect it to my mobo it works just fine.. IS IT THE GPU IS BROKEN OR COMPATIBILITT ISSUE? 

 

Specs;

Cpu :Intel core i7 2600k

Mobo: ecs 1155 h61h2-m2

4x2 1333mhz Ram

Psu: Corsair Vs450

 

The mobo is kinda old..  please help!

[Catsrules]

With the rx 570 card installed, do you get signal if  you connect the monitor to the motherboard?

 

If you do get signal you may need to go into the BIOS and look around for video output options. Some times the integrated graphics can be setup as the primary video out. Just switch that to auto and you should be good.

 

[IOU]

41 minutes ago, Catsrules said:

With the rx 570 card installed, do you get signal if  you connect the monitor to the motherboard?

 

If you do get signal you may need to go into the BIOS and look around for video output options. Some times the integrated graphics can be setup as the primary video out. Just switch that to auto and you should be good.

 

No sir, It has no signal. But the fan is spinning

[Catsrules]

On 6/1/2019 at 10:26 PM, IOU said:

No sir, It has no signal. But the fan is spinning

Darn, that doesn't sounds very good.  Unfortunately I can't think of anything else to do for troubleshooting.  You may have a bad card :(.

The only thing else I can think of is maybe a power supply issue of some kind. But that is a long shot. 

[Quadriplegic]

Dumb question, but did you connect PCIe cables to the card?

[Catsrules]

Oh I thought of one more thing you could try, but it is another long shot. Some times display port and HDMI don't work very well when posting. I am not sure what video outputs your using but if you happen to have a DVI cable and option on your monitor I would use that. For testing purposes. 

 

Sorry I don't have better news