Jump to content

Help!

Go to solution Solved by BrinkGG,
Just now, fasauceome said:

most of the time the pins are in the bottom right of the motherboard

-image-

share a pic of the board so we can see what you may have available

487718_440479_05_front_zoom.jpg

Here's the board from his computer. I can't find a picture of just the motherboard, but it looks like the front panel connectors are either just above the GPU or near the M.2 Drive. 

 

@Pc-Rookie Do you mind taking a picture of the connector on your motherboard? 

Hi, I just bought a new case that comes with power switch, hdd led, reset sw and power led and that shit but my motherboard does not have a normal slot for the cables. Not sure if I have one at all. The only information I have is that it's a Lenovo board and its a mATX.  I have one with 13 pins but even if that's the right one how do I connect the cables?

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, Pc-Rookie said:

Hi, I just bought a new case that comes with power switch, hdd led, reset sw and power led and that shit but my motherboard does not have a normal slot for the cables. Not sure if I have one at all. The only information I have is that it's a Lenovo board and its a mATX.  I have one with 13 pins but even if that's the right one how do I connect the cables?

Is the motherboard from a prebuilt Lenovo system?

If so, do you know the model? That will help a lot with figuring out the pinout. You can also look for small silk-screened text on the motherboard next to the connector.  

Fine you want the PSU tier list? Have the PSU tier list: https://linustechtips.com/main/topic/1116640-psu-tier-list-40-rev-103/

 

Stille (Desktop)

Ryzen 9 3900XT@4.5Ghz - Cryorig H7 Ultimate - 16GB Vengeance LPX 3000Mhz- MSI RTX 3080 Ti Ventus 3x OC - SanDisk Plus 480GB - Crucial MX500 500GB - Intel 660P 1TB SSD - (2x) WD Red 2TB - EVGA G3 650w - Corsair 760T

Evoo Gaming 15"
i7-9750H - 16GB DDR4 - GTX 1660Ti - 480GB SSD M.2 - 1TB 2.5" BX500 SSD 

VM + NAS Server (ProxMox 6.3)

1x Xeon E5-2690 v2  - 92GB ECC DDR3 - Quadro 4000 - Dell H310 HBA (Flashed with IT firmware) -500GB Crucial MX500 (Proxmox Host) Kingston 128GB SSD (FreeNAS dev/ID passthrough) - 8x4TB Toshiba N300 HDD

Toys: Ender 3 Pro, Oculus Rift CV1, Oculus Quest 2, about half a dozen raspberry Pis (2b to 4), Arduino Uno, Arduino Mega, Arduino nano (x3), Arduino nano pro, Atomic Pi. 

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Brink2Three said:

Is the motherboard from a prebuilt Lenovo system?

If so, do you know the model? That will help a lot with figuring out the pinout. You can also look for small silk-screened text on the motherboard next to the connector.  

 

3 minutes ago, Brink2Three said:

Is the motherboard from a prebuilt Lenovo system?

If so, do you know the model? That will help a lot with figuring out the pinout. You can also look for small silk-screened text on the motherboard next to the connector.  

Yes, The motherboard is from a pre-built pc. It's from a Lenovo legion y520 Tower.

https://www.elkjop.no/product/data/stasjonar-pc/LE90H7002JMW/lenovo-legion-y520-tower-stasjonar-gaming-pc

^^ Sorry for Norwegian website^^

Link to comment
Share on other sites

Link to post
Share on other sites

most of the time the pins are in the bottom right of the motherboard

image.png.12a9a7ff3d6017c8d903e0158f49b099.png

share a pic of the board so we can see what you may have available

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I needATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, fasauceome said:

most of the time the pins are in the bottom right of the motherboard

-image-

share a pic of the board so we can see what you may have available

487718_440479_05_front_zoom.jpg

Here's the board from his computer. I can't find a picture of just the motherboard, but it looks like the front panel connectors are either just above the GPU or near the M.2 Drive. 

 

@Pc-Rookie Do you mind taking a picture of the connector on your motherboard? 

Fine you want the PSU tier list? Have the PSU tier list: https://linustechtips.com/main/topic/1116640-psu-tier-list-40-rev-103/

 

Stille (Desktop)

Ryzen 9 3900XT@4.5Ghz - Cryorig H7 Ultimate - 16GB Vengeance LPX 3000Mhz- MSI RTX 3080 Ti Ventus 3x OC - SanDisk Plus 480GB - Crucial MX500 500GB - Intel 660P 1TB SSD - (2x) WD Red 2TB - EVGA G3 650w - Corsair 760T

Evoo Gaming 15"
i7-9750H - 16GB DDR4 - GTX 1660Ti - 480GB SSD M.2 - 1TB 2.5" BX500 SSD 

VM + NAS Server (ProxMox 6.3)

1x Xeon E5-2690 v2  - 92GB ECC DDR3 - Quadro 4000 - Dell H310 HBA (Flashed with IT firmware) -500GB Crucial MX500 (Proxmox Host) Kingston 128GB SSD (FreeNAS dev/ID passthrough) - 8x4TB Toshiba N300 HDD

Toys: Ender 3 Pro, Oculus Rift CV1, Oculus Quest 2, about half a dozen raspberry Pis (2b to 4), Arduino Uno, Arduino Mega, Arduino nano (x3), Arduino nano pro, Atomic Pi. 

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Brink2Three said:

Here's the board from his computer. I can't find a picture of just the motherboard, but it looks like the front panel connectors are either just above the GPU or near the M.2 Drive. 

It's a shame the image is too low res, at a glance it looks like that might be the HD_ Audio connector but I can't be certain

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I needATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

Lenovo is knowk for a lot of proprietary stuff. Good luck

Before you reply to my post, REFRESH. 99.99% chance I edited my post. 

 

My System: i7-13700KF // Corsair iCUE H150i Elite Capellix // MSI MPG Z690 Edge Wifi // 32GB DDR5 G. SKILL RIPJAWS S5 6000 CL32 // Nvidia RTX 4070 Super FE // Corsair 5000D Airflow // Corsair SP120 RGB Pro x7 // Seasonic Focus Plus Gold 850w //1TB ADATA XPG SX8200 Pro/1TB Teamgroup MP33/2TB Seagate 7200RPM Hard Drive // Displays: LG Ultragear 32GP83B x2 // Royal Kludge RK100 // Logitech G Pro X Superlight // Sennheiser DROP PC38x

Link to comment
Share on other sites

Link to post
Share on other sites

20 minutes ago, fasauceome said:

most of the time the pins are in the bottom right of the motherboard

image.png.12a9a7ff3d6017c8d903e0158f49b099.png

share a pic of the board so we can see what you may have available

 

18 minutes ago, Brink2Three said:

487718_440479_05_front_zoom.jpg

Here's the board from his computer. I can't find a picture of just the motherboard, but it looks like the front panel connectors are either just above the GPU or near the M.2 Drive. 

 

@Pc-Rookie Do you mind taking a picture of the connector on your motherboard?

Here are some pictures:

I have currently some cables plugged in so please dont mind themIMG_20190426_204301.thumb.jpg.b5e358e0c311b7a81e848b9f20cd1e41.jpg 

IMG_20190426_204308.jpg

IMG_20190426_204253.jpg

IMG_20190426_204248_1.jpg

IMG_20190426_204234_1.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×