First Time Build Help

[BellMax]

Hi Guys,

 

im a massive noob when it comes to PC building and need some help. I have got so far but have gotten to a point where I’m a bit confused. The case I am using is a nzxt mini itx h200i. 

 

• I have two cables coming out of the liquid cooler pump. (Masterliquid ml240r RG) where do these go into the motherboard? Or do they go into the case controller or the controller that came with the cooler? 
• I have two cables coming out of each of the radiator fans. Where do these go? 
• The case has an rgb strip in it and has a cable on its own at the side of the case. Where would this go? 
• The case has a controller on the back I have figured out where a few of the cable go but there is one labelled as fan1 which has 3 ends on it? Where does this go? 
• The power cables for the add has 3 ends on it. What are you supposed to do with the two ends that are spare? For one of them I had connected the control hub of the case to it. Is that right? 

[BigDamn]

The first picture is of fan power connectors coming from the watercooling unit. Plug your radiator fans into these. Your pump plugs into a SATA power connector, this will also provide power to the fans. Not sure about the RGB shit

[GekkePietert]

The case lighting cable should go into the controller on the back. 

 

The cables from the pump are power and rgb. The 4 pin cable should go into a header on the motherboard with a marking like high amperage or pump. The rgb cable should be going to the motherboard as well.