Jump to content

New build

beriberi
By beriberi
in New Builds and Planning
 Share
Posted

Hello everyone! 

I’m foram europe! And planning a new build with a budget of around 2500€.

The goal is to be able to max out many of the AAA games that are out already and the ones being released in the next 2-3 years! I’m pairing this build with a DELL Alienware AW3418DW 3440x1440p monitor!

 

I7-9700k (425 euros)

EVGA rtx 2080 ti 11 GB (1150 euros)

NZXT H500i (105 euros)

Motherboard GigaByte Z390 Aorus Pro WiFi (165 euros)

Noctua NH-D15 (90 euros)

Corsair Vengeance LPX 16GB (2x8GB) DDR4-3200MHz CL16 (130 euros)

Samsung 970 EVO 1TB (230 euros)

EVGA Supernova 650 G3 (110 euros)

 

Total 2400 euros

 

Is this build any good for the objective. It’s my first time building a pc so i’m really a beginner. Any help would be appreciated!

 

Thank you very much!

 

 
Link to comment
https://linustechtips.com/topic/1042133-new-build/
Share on other sites
Link to post
Share on other sites
Posted

the case doesnt have enough headroom for the big air cooler and the airflow isn't that good from the start. Change that to something say Corsair's 270R/275R, Fractal Define C/Meshify C, Cooler Master H500 Mesh etc.

 

Also include enough case fans to fill in all the fan mounts to give better airflow.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1042133-new-build/#findComment-12372857
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, Jurrunio said:

the case doesnt have enough headroom for the big air cooler and the airflow isn't that good from the start. Change that to something say Corsair's 270R/275R, Fractal Define C/Meshify C, Cooler Master H500 Mesh etc.

 

Also include enough case fans to fill in all the fan mounts to give better airflow.

It should just about fit, as the D15 is listed as 165mm with the fan, and the H500i takes up to 165mm. The Meshify would be a good change though.

Link to comment
https://linustechtips.com/topic/1042133-new-build/#findComment-12372880
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, lee32uk said:

It should just about fit, as the D15 is listed as 165mm with the fan, and the H500i takes up to 165mm. The Meshify would be a good change though.

Yeah, enough to make manufacturing tolerances screw you over. My D15 is just tall enough to scratch my friend's H500i on the side panel with a heatpipe.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1042133-new-build/#findComment-12372883
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, Jurrunio said:

Yeah, enough to make manufacturing tolerances screw you over. My D15 is just tall enough to scratch my friend's H500i on the side panel with a heatpipe.

The perils of having a Glass side panel ? Anyway the Meshify would solve that potential issue.

Link to comment
https://linustechtips.com/topic/1042133-new-build/#findComment-12372893
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing New Builds and Planning

×