Firmware update bricked PC

[Lordy41]

I updated my firmware through device manager. The pc asked to restart, now it won't post. nothing but a black screen. RGB, keyboard backlight, mouse, and fans work.

Windows 10 64 bit

Intel I5-6400

Nvidia GTX 970

Samsung evo 860 500gb

Tobisha DT01ACA100 1TB

hynix HMA41GU6AFR8N-TF 1X8GB

Asus G11CD

 

[Shimejii]

Fully Unplug the device and try again, Fully unplug the monitor and try again as well

[Lordy41]

Tried it, didn't work.

[Lordy41]

7 minutes ago, Shimejii said:

Fully Unplug the device and try again, Fully unplug the monitor and try again as well

Tried it, didn't work

[Shimejii]

56 minutes ago, Lordy41 said:

Tried it, didn't work

Hrmm Then have you tried taking out the Cmos Battery or resetting it? Generally firmware bricks are a bit harder to pinpoint the exact issue without knowing what exactly you updated. What firmware did you update? 

[Lordy41]

12 minutes ago, Shimejii said:

Hrmm Then have you tried taking out the Cmos Battery or resetting it? Generally firmware bricks are a bit harder to pinpoint the exact issue without knowing what exactly you updated. What firmware did you update? 

Just finished doing it. Now im stuck in a boot loop. I've tried option i've had now and nothing seems to work.

[Lordy41]

After digging through the Bios I found that it was trying to boot from my Hard drive instead of my ssd. a simple change in boot order ended my hours of misery.