Jump to content

This option is called VCORE? question

worry
By worry
in CPUs, Motherboards, and Memory
 Share
Posted

Hi. My 9900K in uefi have auto that settings. ITs called VCORe yes?

screen:

 

cu.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, worry said:

Hi. My 9900K in uefi have auto that settings. ITs called VCORe yes?

screen:

 

-snip-

Yes it is, but use an offset voltage instead of manual voltage to allow the cpu to drop voltage when not underload or under light loads.

|King Of The Lost|
Project Dark: i7 7820x 5.1GHz | X299 Dark | Trident Z 32GB 3200MHz | GTX 1080Ti Hybrid | Corsair 760t | 1TB Samsung 860 Pro | EVGA Supernova G2 850w | H110i GTX
Lava: i9 12900k 5.1GHz (Undervolted to 1.26v)| MSI z690 Pro DDR4| Dominator Platnium 32GB 3800MHz| Power Color Red Devil RX 6950 XT| Seasonic Focus Platnium 850w| NZXT Kraken Z53
Unholy Rampage: i7 5930k 4.7GHz 4.4 Ring| X99 Rampage|Ripjaws IV 16GB 2800 CL13| GTX 1080 Strix(Custom XOC Signed BIOS) | Seasonic Focus Platinum 850w |H100i v2 
Revenge of 775: Pentium 641 | Biostar TPower i45| Crucial Tracer 1066 DDR2 | GTX 580 Classified Ultra | EVGA 650 BQ | Noctua NH D14

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

It this normal when under REALBENCH my voltage from cpuz balancing between 1.305 to 1.315? I added manually in uefi vcore 1.310.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

You should only need 1.1-1.24V to run stock on a 9900K depending on how bad/good your chip is. 

Save up to 10% on eVGA.com purchases, use my Associates Code: 47AQQ6KPU2IZNXY

My system on ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42686 

Primary Rig:

CPU: AMD 5950X at 4.65GHz 1.275V - Mobo: Asus Crosshair VIII Hero - PSU: eVGA P2 1200W

CPU Cooler: EK Quantum Velocity Block (480mm XE Radiator with push/pull EK Vardar D-RGB fans)

2 x 16GB G.Skill Trident Z Royal 3600MHz CL14 RAM (14-15-15-35-1T at 1.45V)

GPU: eVGA RTX 3090 Kingpin Hybrid - Core @ 2160MHz @ 1068mV, VRAM +1000MHz

Case: Thermaltake View 91 - SSDs/HDDs: Too many to list; Samsung 980 Pro 1TB & 2TB M.2s, Samsung 4TB SATA SSD

Monitor: Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

5ghz and on 1.29 giving whea  19 in real bench.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, worry said:

It this normal when under REALBENCH my voltage from cpuz balancing between 1.305 to 1.315? I added manually in uefi vcore 1.310.

That's pretty normal. Most boards depending on LLC will readout slightly higher to slightly lower than what's set. 

Save up to 10% on eVGA.com purchases, use my Associates Code: 47AQQ6KPU2IZNXY

My system on ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42686 

Primary Rig:

CPU: AMD 5950X at 4.65GHz 1.275V - Mobo: Asus Crosshair VIII Hero - PSU: eVGA P2 1200W

CPU Cooler: EK Quantum Velocity Block (480mm XE Radiator with push/pull EK Vardar D-RGB fans)

2 x 16GB G.Skill Trident Z Royal 3600MHz CL14 RAM (14-15-15-35-1T at 1.45V)

GPU: eVGA RTX 3090 Kingpin Hybrid - Core @ 2160MHz @ 1068mV, VRAM +1000MHz

Case: Thermaltake View 91 - SSDs/HDDs: Too many to list; Samsung 980 Pro 1TB & 2TB M.2s, Samsung 4TB SATA SSD

Monitor: Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×