Folding Stuck at "Ready"

[BelgianNoise]

On 8/17/2013 at 10:14 PM, Whaler_99 said:

 

 

On 8/17/2013 at 10:18 PM, Whiskers said:

 

I am having the same issue. I switched from a RX 480 + RX 580 to a GTX 1070 and it isnt starting.
I tried everything above.
I even reinstalled and stuff. any idea ?

 

 

Reference this topic;

https://linustechtips.com/main/modcp/reports/77538/

[BelgianNoise]

This is the log:
19:00:02:WU01:FS00:Requesting new work unit for slot 00: READY gpu:0:GP104 [GeForce GTX 1070] 6463 from 140.163.4.231
19:00:02:WU01:FS00:Connecting to 140.163.4.231:8080
19:00:02:WU01:FS00:Downloading 25.28MiB
19:00:08:WU01:FS00:Download 70.72%
19:00:09:WU01:FS00:Download complete
19:00:09:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:11718 run:0 clone:1224 gen:333 core:0x21 unit:0x000001d28ca304e75b898ff6bb8ff89e
19:00:09:WU01:FS00:Starting
19:00:09:ERROR:WU01:FS00:Failed to start core: Option 'opencl-index' has no default and is not set.
19:00:09:WU01:FS00:Starting
19:00:09:ERROR:WU01:FS00:Failed to start core: Option 'opencl-index' has no default and is not set.


Ive tried setting the opencl-index to 0 and 1 but then i get the same error for "cuda-index".

When I change both of these to 0 or 1 or anything, im getting this error:
19:03:27:WU01:FS00:0x21:ERROR:126: Bad platformId size.
19:03:27:WU01:FS00:0x21:Saving result file logfile_01.txt
19:03:27:WU01:FS00:0x21:Saving result file log.txt
19:03:27:WU01:FS00:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
19:03:28:WARNING:WU01:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
19:03:28:WU01:FS00:Sending unit results: id:01 state:SEND error:FAULTY project:14156 run:18 clone:15 gen:85 core:0x21 unit:0x000000670002894c5c423374c6846a54
19:03:28:WU01:FS00:Uploading 1.88KiB to 155.247.166.220
19:03:28:WU01:FS00:Connecting to 155.247.166.220:8080
19:03:28:WU01:FS00:Upload complete
19:03:28:WU01:FS00:Server responded WORK_ACK (400)
19:03:28:WU01:FS00:Cleaning up

 

This just repeats over and over and over

[Gorgon]

I’m assuming Windows?

 

I suspect your GPU drivers are messed up. Remenants of the AMD driver still there and/or Nvidia Driver did not install properly.

 

I would start by uninstalling Folding at Home then try running a utility like DDU and get the drivers sorted out then re install the Folding at Home software

[Imbellis]

My problem, while getting this same issue, was drivers. I was also switching from AMD to a 1070.

 

Go to Nvidia's page and download the 1070 drivers - that should fix it.