RAID 0 SSD UEFI Driver

[ajcroteau]

Hi guys,

 

I'm trying to setup a RAID 0 using 2x 250GB Samung SSDs. I got it working using the Legacy ROM however I've read that the UEFI Driver is better to use however when i tried to boot the machine, I get an error stating that "the current bios setting does not fully support the boot device" error message and something about messing around with the CSM settings which when i did does nothing... Also, i'm not seeing the Intel Rapid Storage Technology in the bios under the advanced settings...

 

I'm using a Sabertooth 990FX R2.0 with the latest BIOS 2104...

 

From what I read, and i haven't been able to find any decent tutorials, i'm guessing I need to create a UEFI USB Boot device that is GPT & FAT32 formatted or something... Is this how I get to the Intel Rapid Storage Technology tab in the bios?

 

Any help would be appreciated...

 

- AJ

[Altecice]

I myself also tried messing around with the UEFI Driver but I also got those messages. After looking into for abit the only pro I could see was that it wont have the black DOS screen on boot up while its searching for the array. so 1-2 seconds more boot time over the UEFI.