cpu Cant overclock

[Aljaz]

My problem is that I can not overclock my CPU, no matter how much volt is resumed.
I run overclock with AMD master software and after setting the settings, my computer does not come back, which goes out and then I need to reset cmos. Help me before I break my computer

[TH3R34P3R]

what motherboard do you have? and is it necessary to overclock it? 

[Aljaz]

Gigabyte B450m d3 something like that. @TH3R34P3R

[glenalz81]

Can you list your full specs, along with the frequency and voltage used within Ryzen master?

 

[Aljaz]

Yes. My specs.

ryzen 5 2400g (using igpu “vega 11” cuz my gpu was faulty “rx 570”)

Kingston fury 8gb 2666

WD blue 3TB HDD

WD SSD 250GB

APACER SDD 250GB

PSU: cooler master MASTERwatt 450W

using stock cooler for cpu

motherboard: gigabyte b450m d3- something i dont know

@glenalz81

Stock cpu voltage is 1,45 which is overkill i think. If i lower it to like 1,3 pc would not boot. Igpu on stock is 400 with 1,1 voltage 

[glenalz81]

8 minutes ago, Aljaz said:

Kingston fury 8gb 2666

Is that 1 x 8gb, or 2 x 4gb?

[mbox]

12 minutes ago, Aljaz said:

Stock cpu voltage is 4,5 which is overkill i think. If i lower it to like 1,3 pc would not boot. Igpu on stock is 400 with 1,1 voltage 

4.5 stock voltage seems impossible are you shure? where are you looking at it? 1.45v is already too much on air, at 4.5v it should pop like an old bulb. Try to overlock in the bios like 1.35v @3.8GHz

[Aljaz]

1 8gb. I was wondering if that could be a problem cuz it is not dual channel but before I bought the build I could easily overclock thru the ryzen master.

now just cant ( i can overclock thru bios)

@glenalz81

[Aljaz]

4 minutes ago, mbox said:

4.5 stock voltage seems impossible are you shure? where are you looking at it? 1.45v is already too much on air, at 4.5v it should pop like an old bulb. Try to overlock in the bios like 1.35v @3.8GHz

Sorry i mean 1,45 sry ye i know its overkill so i drop it to 1,3 but then pc wont boot back

[mbox]

Just now, Aljaz said:

Sorry i mean 1,45 sry ye i know its overkill so i drop it to 1,3 but then pc wont boot back

That makes sense, I might have just missed the info but you are now at 1.3 and what frequency?

[Aljaz]

 

2 minutes ago, mbox said:

That makes sense, I might have just missed the info but you are now at 1.3 and what frequency?

Stock frequency is 3.6 and I set it to 3.8 at 1,3 v this should work normal at least it was working before I discovered this issue.

[mbox]

I would suggest to stick to BIOS overclocking if it's working or to do a clean install of Ryzen master. You could also try to reset all BIOS settings to factory and then oc again if you were stable at the same voltage and frequency. Did you do anything between when it was working and when it started crashing?

[Aljaz]

1 minute ago, mbox said:

I would suggest to stick to BIOS overclocking if it's working or to do a clean install of Ryzen master. You could also try to reset all BIOS settings to factory and then oc again if you were stable at the same voltage and frequency. Did you do anything between when it was working and when it started crashing?

Between working and crashing I installed GPU in and after gpu was faulty this problem came in. I did reset the bios to default settings,  but i really didnt try to reinstall the ryzen master.

 

 

[mbox]

2 minutes ago, Aljaz said:

Between working and crashing I installed GPU in and after gpu was faulty this problem came in. I did reset the bios to default settings,  but i really didnt try to reinstall the ryzen master.

 

 

Try maybe a clean install of Radeon Settings if you didn't already (i suggest to use DDU)

[Aljaz]

Thank u

1 minute ago, mbox said:

Try maybe a clean install of Radeon Settings if you didn't already (i suggest to use DDU)

Thank u for your time and help.

Im gonna do it right now and let you know if it works.