Graphics card problems

[Sugar gay]

Hello I had been having this problem with my graphics card (I think this is the cause). Basically when I was running games on my pc my monitor randomly would go black and the pc would try to restart itself, my graphics card (fans still spinning) would make an electric cutting out sound and the LED would cut out. The LED would then turn on only to be cut off again. The cycle repeated like this until I turned the power of with the psu. I tried doing downgrading the driver and that seemed to take care of the restarting problem. Except I was getting freezes in games. After a while I installed a 2 tb hard drive and unplugged the cable to the gpu, when I plugged it in again I’m guesing I used to much force because when I started the pc the graphics cards LED didn’t even turn on. I reinstalled the graphics card and it worked but I can’t remember what happened after that. One day after not using my pc for a bit of time I decided to download a game, after downloading I played for about fifteen minutes and then it did the restarting thing. I turned of the psu and tried to restart the pc but this time I couldn’t get to the home screen before it restarted. And when I tried again didn’t even turn on. I have tried reinstalling the graphics card like before but it leads to the same result, as in those three restarts. Any ideas?

 

Specs 

 

Ryzen 5 2600

 

rx 580 used

 

psu be quiet 80+ silver (3 months old)

 

[Sugar gay]

Forgot to add when the led isn’t on the monitor is black 

[Constantin]

All this writing and you didn't bother writing what is your GPU........

[narrdarr]

Sounds more like a dead psu.

What are your specs?

Can you boot without a dgpu

[Sugar gay]

25 minutes ago, narrdarr said:

Sounds more like a dead psu.

What are your specs?

Can you boot without a dgpu

No forgot to write my specs. Wouldn’t the whole system shut down if it was the psu though?

[Sugar gay]

44 minutes ago, Constantin said:

All this writing and you didn't bother writing what is your GPU........

Sorry, Forgot to write my specs, done now.