Jump to content

Question BIOS ?

ZEKENZY
By ZEKENZY
in New Builds and Planning
 Share
Posted

Hi guy ! with new PC  build . Do I need go BIOS and adjust something and after that install window 10. I don't know how to adjust BIOS for first time ?

Can I with new PC build  , just turn on power and install window 10. and don't have to adjust BIOS, is this will be okay or No ? 

Thanks you

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If you want to change any settings in the BIOS then you will have go into it but you don't need to do anything after Windows has installed. 

زندگی از چراغ

Intel Core i7 7800X 6C/12T (4.5GHz), Corsair H150i Pro RGB (360mm), Asus Prime X299-A, Corsair Vengeance LPX 32GB (4X4GB & 2X8GB 3000MHz DDR4), MSI GeForce GTX 1070 Gaming X 8G (2.113GHz core & 9.104GHz memory), 1 Samsung 970 Evo Plus 1TB NVMe M.2, 1 Samsung 850 Pro 256GB SSD, 1 Samsung 850 Evo 500GB SSD, 1 WD Red 1TB mechanical drive, Corsair RM750X 80+ Gold fully modular PSU, Corsair Obsidian 750D full tower case, Corsair Glaive RGB mouse, Corsair K70 RGB MK.2 (Cherry MX Red) keyboard, Asus VN247HA (1920x1080 60Hz 16:9), Audio Technica ATH-M20x headphones & Windows 10 Home 64 bit. 

 

 

The time Linus replied to me on one of my threads: 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
58 minutes ago, ZEKENZY said:

Hi guy ! with new PC  build . Do I need go BIOS and adjust something and after that install window 10. I don't know how to adjust BIOS for first time ?

Can I with new PC build  , just turn on power and install window 10. and don't have to adjust BIOS, is this will be okay or No ? 

Thanks you

You will need to go into the BIOS initially at least to review the default settings. But if you have purchased memory faster than DDR4-2133 you will have to instruct the BIOS to use XMP. You may also have to change the initial boot device. There may also be a need to enable things like LAN port and audio.

80+ ratings certify electrical efficiency. Not quality.

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
22 hours ago, brob said:

You will need to go into the BIOS initially at least to review the default settings. But if you have purchased memory faster than DDR4-2133 you will have to instruct the BIOS to use XMP. You may also have to change the initial boot device. There may also be a need to enable things like LAN port and audio.

what's key I to press to into BIOS  ? and what I need to do next ? I don't have experience in BIOS ? I never adjust anything from BIOS before . 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
6 hours ago, ZEKENZY said:

what's key I to press to into BIOS  ? and what I need to do next ? I don't have experience in BIOS ? I never adjust anything from BIOS before . 

A message on screen during boot will tell you the key(s) to press to go into the BIOS. It is often DEL. Check the motherboard User's Manual. If one was not included with the motherboard, it can likely be downloaded from the manufacturer's web site.

80+ ratings certify electrical efficiency. Not quality.

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing New Builds and Planning

×