HCP

Made some more progress in this mod.
 
Side panels, i use the side panel with buttons and audio jacks from the original panel.
 

 
And here is the side panel for the black prodigy (yeah, i´m making one white, one black and one Black Phenom cut the same way)
Some bubble-popping to do before its done.
I was trying with adding a Be Quiet logo on the acrylic, then wrap flat black on top of it to get embossed logo, worked pretty well.
 

Made some more progress in this mod.
 
Side panels, i use the side panel with buttons and audio jacks from the original panel.
 

 
And here is the side panel for the black prodigy (yeah, i´m making one white, one black and one Black Phenom cut the same way)
Some bubble-popping to do before its done.
I was trying with adding a Be Quiet logo on the acrylic, then wrap flat black on top of it to get embossed logo, worked pretty well.
 

Well, not again huh ? 
 
Need a HTPC for my living room. 
Never found a case i wanted, so i took a white Prodigy i had ad remembered its pretty easy to mod it.
 
== HARDWARE ==
Zotac G41 ITX motherboard
Intel E6600 cpu
8GB ram
Will try on the onboard graphics at first, if i need more power i have a 6570 low profile card to use with a riser.

So i tested it out with some 4mm ABS plastic and it was good, this gray will be painted later on and not be visible as the front panel goes on the outside of it.

So here it goes, build thread No#... too many

Some hardware pics, like shown in the pics there is alot of space left for drives or a SFX PSU.
I will just use a small SSD so no need for space in my case.
And, it can be cut a inch more on the height if a H60/80/100 is used
 

 

Something like this will be the end result, + a Bitfenix logo somewhere.
 
Didnt have enough acrylic at home for side panels, so im testing with some white ABS.
Made the plate for the motherboard today, and tested to install the parts, works well!
 
Put together with double sided tape right now, so a bit hanging here and there
 

Something like this will be the end result, + a Bitfenix logo somewhere.
 
Didnt have enough acrylic at home for side panels, so im testing with some white ABS.
Made the plate for the motherboard today, and tested to install the parts, works well!
 
Put together with double sided tape right now, so a bit hanging here and there
 

Something like this will be the end result, + a Bitfenix logo somewhere.
 
Didnt have enough acrylic at home for side panels, so im testing with some white ABS.
Made the plate for the motherboard today, and tested to install the parts, works well!
 
Put together with double sided tape right now, so a bit hanging here and there
 

Its getting closer   Front panel need some more love, but in overall i´m satisfied. White enermax fans in the top.   Next up, motherboard base.  

Well, not again huh ? 
 
Need a HTPC for my living room. 
Never found a case i wanted, so i took a white Prodigy i had ad remembered its pretty easy to mod it.
 
== HARDWARE ==
Zotac G41 ITX motherboard
Intel E6600 cpu
8GB ram
Will try on the onboard graphics at first, if i need more power i have a 6570 low profile card to use with a riser.

So i tested it out with some 4mm ABS plastic and it was good, this gray will be painted later on and not be visible as the front panel goes on the outside of it.

So here it goes, build thread No#... too many

Well, not again huh ? 
 
Need a HTPC for my living room. 
Never found a case i wanted, so i took a white Prodigy i had ad remembered its pretty easy to mod it.
 
== HARDWARE ==
Zotac G41 ITX motherboard
Intel E6600 cpu
8GB ram
Will try on the onboard graphics at first, if i need more power i have a 6570 low profile card to use with a riser.

So i tested it out with some 4mm ABS plastic and it was good, this gray will be painted later on and not be visible as the front panel goes on the outside of it.

So here it goes, build thread No#... too many

Well, not again huh ? 
 
Need a HTPC for my living room. 
Never found a case i wanted, so i took a white Prodigy i had ad remembered its pretty easy to mod it.
 
== HARDWARE ==
Zotac G41 ITX motherboard
Intel E6600 cpu
8GB ram
Will try on the onboard graphics at first, if i need more power i have a 6570 low profile card to use with a riser.

So i tested it out with some 4mm ABS plastic and it was good, this gray will be painted later on and not be visible as the front panel goes on the outside of it.

So here it goes, build thread No#... too many

Well, not again huh ? 
 
Need a HTPC for my living room. 
Never found a case i wanted, so i took a white Prodigy i had ad remembered its pretty easy to mod it.
 
== HARDWARE ==
Zotac G41 ITX motherboard
Intel E6600 cpu
8GB ram
Will try on the onboard graphics at first, if i need more power i have a 6570 low profile card to use with a riser.

So i tested it out with some 4mm ABS plastic and it was good, this gray will be painted later on and not be visible as the front panel goes on the outside of it.

So here it goes, build thread No#... too many

Its putty-time, adding some bondo and sanding it. 
 
All walls done, and the floor is on.
 

Oh, I am completely sorry. I thought you just quoted the pics. My bad.

Let me tell ya, you have alot of work ahead of you
I started my CM2 in May and only had the panels cut yet, programming the lights and making the panels to hold them takes... yeah, hours
Looking forward to your creation, you probably end up finished before me, i do mine in acrylic and smaller, about 45x45cm.
Let me know if you need any information about the CM2, i had contact with the creators of it and have alot of specs if you need anything to complete your project!
A quick hint, you have too much space between each cube in relation to scale. Insert a image on a CM2 and scale the image to get better spacing and the end result will get better too!
I may have scale skp files if they are any help for you.
Have a good trip, will watch your build log!

Whoo Air 540 *fist bump*

Looks really nice.

Looks awesome so far! Good luck!

I love the air 540 cant wait to see when its fully done

Its putty-time, adding some bondo and sanding it. 
 
All walls done, and the floor is on.
 

Will do that later when i make the brackets and frames to keep drives and motherboard standing in the case, and when i know wich ITX to use.
I have all the parts here, but dont know yet wich one to use.

Now i´m back to my real projects again   As the YAPP installing i needed to do some work to keep my hands busy. Working on the round roof and some side panels.   Current status!    

Now i´m back to my real projects again   As the YAPP installing i needed to do some work to keep my hands busy. Working on the round roof and some side panels.   Current status!    

I think there is alot more going on behind the scenes that take awful alot of time, making another channel will bite time out of the content they are making right now.
I dont want this to happen, i like it the way it is.

I think there is alot more going on behind the scenes that take awful alot of time, making another channel will bite time out of the content they are making right now.
I dont want this to happen, i like it the way it is.