ALN118

I would argue that a stock cooler is more then adequate for a 5600X. And if i would add any Cooler a 20€ budget cooler would be more than enough for a 65W CPU. wont go with a 70€ cooler for sure

PCPartPicker Part List
CPU: *AMD Ryzen 5 5600 3.5 GHz 6-Core Processor  (€132.10 @ Caseking) 
CPU Cooler: *Thermalright Assassin Spirit V2 66.17 CFM CPU Cooler  (€19.59 @ Amazon Deutschland) 
Motherboard: *MSI MAG B550 TOMAHAWK ATX AM4 Motherboard  (€135.34 @ Galaxus) 
Memory: Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3600 CL18 Memory  (€75.98 @ Amazon Deutschland) 
Storage: Crucial P3 1 TB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive  (€59.90 @ Alza) 
Video Card: XFX Speedster SWFT 319 Radeon RX 6800 16 GB Video Card  (€410.00 @ Mindfactory) 
Case: *Fractal Design Focus 2 ATX Mid Tower Case  (€65.88 @ Amazon Deutschland) 
Power Supply: *Gigabyte UD750GM 750 W 80+ Gold Certified Fully Modular ATX Power Supply  (€84.90 @ Alza) 
Case Fan: *ARCTIC P12 56.3 CFM 120 mm Fan  (€5.89 @ Alza) 
Total: €989.58
Prices include shipping, taxes, and discounts when available
*Lowest price parts chosen from parametric criteria
Generated by PCPartPicker 2024-01-10 00:33 CET+0100

I would add a third-party CPU Cooler to your list and not use the boxed cooler from AMD. I had a good experience with coolers from bequiet (be quiet! Dark Rock 4 CPU Cooler (BK021) - PCPartPicker)

Thanks a lot bought this conifig 

I would redo it if it were me,  you really don't know how much is being held behind that compression fitting until you take it apart.  Every time I've seen that the one side was all the way over the barb and just under the compression collar.  Too risky imo

That is not far down enough on the barb portion it should be flush with the bottom. If you have trouble getting it all the way down try dipping the end in hot water to soften the tubing.

Honestly it being a compression fitting, it should be fine. Could always re seat it, so its straight like the other one. Ive don't much worst. If it aint leaking with heat and pressure in the system, it prolly never will.
 

@W-L, @Mick Naughty, and @0ld_Chicken would know more than I would, but I think that's bad. 

Im sorry hope its fixed !

Username: ALN118
 
My Fav videos i watched on Vessel 
 
https://www.vessel.com/videos/LCoY5zfFf   https://www.vessel.com/videos/Yj4PbcgKj     And my twitter post   https://twitter.com/ALN__118/status/580419922553118722     GL Everyone

OnePlus One
I also have small-ish hands and i can use it fine
The software is great, you CAN keep it like stock android but you can also do SO much more.
If you have an invite, get it now.

You will get updates to that or to CM, whichever they use. Also android 5.0 (Cm12) should be here by the end of January. 

Oneplus One. Beware that the support and warranty is basically non-existant. ( That's what you get when your marges are like 0)

try  dir /B /AD > Film-liste.txt

Would loooovvee to win :P 
 
My twitter: https://twitter.com/ALN__118/status/353958449559781376
 

I'd be happy to help support you!