Jump to content

mmk

Member
  • Posts

    215
  • Joined

  • Last visited

Everything posted by mmk

  1. https://www.lttstore.com/ Not much there yet.
  2. You guys have probably thought of this already, but since the expo is downtown at the convention center, perhaps you can hit up the Pan Pacific and some of the other decent hotels in the west end and see if they would be willing to offer some discounts on hotel stays for the convention visitors attending?
  3. Can always fly to Vancouver via Seattle. Pretty sure there are daily flight between the two cities. Also can take Amtrak from Seattle to Vancouver, not sure of the schedule, or rent a car, it's only a couple hour drive or so.
  4. If it's pci or agp, then it will not work.
  5. You would need a 300 series board if you want to use the 8600K.
  6. Have you tried a different cable, or tried with another monitor, if no other monitor, you can try it on your tv, if it has hdmi inputs. If you have already tried the above, then try removing the card and re-seating it, make sure to plug the gpu power in if it requires it and try again. If that doesn't work, you can try the vid card in another system to make sure it works, otherwise you may have a bad monitor(if it is new and you have not used it before) or a bad video card.
  7. Did you select the correct input on the monitor, some times a monitor will not automatically select the correct input and you have to change to it manually.
  8. Good chance they may not take it back as they will probably say that you bent them and they are not under warranty any more. If this occurs, you can try Linus's method to try repair the pins. https://www.youtube.com/watch?v=O1H5_FVX9lU
  9. I had some thing similar happen to me after one update, a few updates ago where about half of my apps became disabled. Fortunately my store was not affected and I was able to repair the apps by clicking the link in the error message that came up when I tried to start the app that started the app store and repaired the apps. Since your store is also affected, have you tried to repair the store or reinstalling it? https://answers.microsoft.com/en-us/windows/forum/windows_10-windows_store/download-and-install-ms-windows-store/e9d71c80-8399-49d5-9d92-a18add81a4dc?auth=1 https://answers.microsoft.com/en-us/windows/forum/windows_10-windows_store-winpc/how-to-reinstall-windows-store-on-windows-10/4621014f-1b8e-42cf-861a-9f93caa5669c
  10. mmk

    Fast Startup?

    I always disable Fast Startup as I have run into problems with it, but here is a quick explanation of what it does: https://www.howtogeek.com/243901/the-pros-and-cons-of-windows-10s-fast-startup-mode/
  11. Could be something as simple as maybe turning on the psu??
  12. You will need a Z370 type board for the 8700K.
  13. As Oshino says, this is for telephone connections, not internet. Manual here: https://www.suttlesolutions.com//pdfs/instruction-sheets/SAM-V8M_man.pdf
  14. If your win 10 is legally activated, then you should be able to do a clean install, you shouldn't need a key as the install is tagged to your hardware configuration. Use the windows media creation tool to create the installation media that you want to use. https://www.microsoft.com/en-ca/software-download/windows10 After making the media, remove your old drive and insert the ssd and see if you can install windows.
  15. From the disk manager it says that the new drive has not been initialized yet, I think that you may need to initialize the ssd first to be visible to windows.
  16. Sorry, didn't think. Cable secured properly, correct input selected on monitor? Try resetting the bios again, keep the battery out longer or use the bios reset button or short the reset pins on the motherboard and take out the battery also. See if any of these work.
  17. Make sure onboard graphics is enabled in the bios.
  18. Did you try a different power connector or a different sata cable or using a different port?
  19. Probably not if it is not even showing up in the bios.
  20. If not in the bios, maybe a bad sata cable or power cable. Try different cable if you have them and see if that helps, if not, could be a bad drive.
  21. Recently had an experience with a ssd, this time a Samsung. It would show up in the bios and device manager, but not in computer management, so could not partition or format it. Ended up being a bad drive and had to be replaced. Might be the same problem here?
  22. Depending on what you want: Grandandtoy.com Staples.ca thesource.ca costco.ca londondrugs.com to name a few.
  23. mmk

    NAS HDD

    I have a couple of 4TB drives, but they do come in different sizes.
  24. mmk

    NAS HDD

    I use WD Red drives, they are made for NAS use. Good drives.
×