Jump to content

kidroc666

Member
 View Profile  See their activity

  • Posts

    172

  • Joined

  • Last visited

 Content Type 

Everything posted by kidroc666

  1. kidroc666
    get a 1050ti call it a day
  2. kidroc666
    yes u can and no and no.. well as long as u can see them in the bios you can and make sure you set the bios ahic
  3. kidroc666
    there's really no way of knowing so it's a crap shoot just keep grabbing files one by one or i'd try some kind of recovery software
  4. kidroc666
    it's been around for a long time bro!!
  5. kidroc666
    The h80v2 is damn good 120mm AIO and there are a few more...
  6. kidroc666
    pretty sure you need to have an 8 pin cpu connector. plugged in there!! in fact i just looked at there website you need the 8 pin bro!!
  7. kidroc666
    yes the lighting node is what you want not the commander controls the rgb all you do is hook up the sata and i think a fan connector so make sure your mobo has and extra fan header or you need an adapter for that then hook all your fans that support rgb to the node install icue software bam done deal bro!!
  8. kidroc666
    thanks for the update..
  9. kidroc666
    did you happen to try to clear the cmos?
  10. kidroc666
    Has it the ram ever lit up? and do you have the software to control the leds installed it should still lite up it's default you'd think..
  11. kidroc666
    watch the videos bro!!
  12. kidroc666
    if you have a hell of a power spike for that to happen and then it usually takes out your network card but it can take it all out just very unlikely...
  13. kidroc666
    On rare occasion the pump still spins.. I.E you can see it in the bios but the impeller fins wear out and disintegrate then the pumps not moving water anymore..
  14. kidroc666
    i just drop it in and i do the wiggle then i place a finger on the cpu and push the lever down..
  15. kidroc666
    i really do feel bad for all the people who just don't know better but damn do some research!!!
  16. kidroc666
    did you say you updated the bios then you installed a new cpu? what you need to do is remove your motherboard batt for 5 min and if your board has a clear cmos button go ahead and hold that down for 20 sec with the power cord unplugged put your cpu back and report you should see the cmos now good luck
×