Ravendarat

As someone that works on cars everyday including often working on the ECU I can confidently say this is NOT the case. It would be extremely tough to unplug almost any ecu while also keeping control of a speeding car. The right answer here is to turn the key back to accessory, this will turn off the motor while not locking the steering wheel, also you cant turn the ignition completely off while the car is still in gear, That will turn off the motor and then you can simply brake with the foot brake or ebrake and stop safely. Now if the car is push to start the answer changes somewhat.

Im currently using 6 fans, a commander, a k95, dark core mouse, vengence pro ram and headset all through ICUE and it all automatically detected

Just launch ICUE and it will detect any compatible gear and it will give you the option to control it all from the software including updating any firmware

Just about positive that they arent doing any founders editions so if thats what you are dead set on Id be looking elsewhere

Try unplugging the reset button from the control board there and just jump the two pins on the control board where the reset is currently plugged in. Maybe the reset button is dead on the case

Ok sorry can you explain this better? Im not sure exactly what you are talking about here. Can you show a picture thats not so zoomed in? I know you are wanting to fit a 360m rad in some unknown PC case in an unspecified location but I need more details before I can even begin to try to help

In the case of the one you bought, all it does is stop the flow when its closed. As for a one way valve like you are describing, I have no idea where to get one. What are you using it for exactly?

Not always, a check valve can also just stop fluid from passing either direction when closed or both directions when open. There are a number of different types of check valves. Yours is working the way it was designed even if its not the way you hoped

Im fairly certain that is exactly the way it is supposed to work. My understanding is they are basically just a variation on a stop valve similar to a ball valve

Australian Shepard

If you can find a case that you can watercool in that might be a better route as the PCB for the 3090 is comparably quite small to the aircooler, might be easier to do a soft tubing loop.

Are those burn marks on the GPU and Mobo? If so then your power supply is the least of your concerns

What is it you are looking for and when you say reset do you mean like you reformatted your drive?

I have the Dark Core myself, and while I like it I really think I will be going back to Logitech sooner than later, just hands down the best overall mice Ive used.

Its possible your card isnt listed for that block simply because they never actually tried it. If I was in your shoes I would order the block and just test fit it to the card when it shows up, if it fits than you are set, if not than just send it back. As for the temp sensor, its nice to have but certainly not needed, you have built in temp monitoring on your hardware. Generally speaking knowing the coolant temp is a "nice to have" not a requirement.

Ya it has been, went live on FP like 4 minutes ago, but I guess it wasnt dropped on youtube so that gives it away too

I didnt see or hear anything in todays LTT or MA video

I mean technically if you have bad cooling in your case you would thermal throttle the GPU which could be considered a form of a bottle neck, with cooling being the bottle neck itself

I get what you mean but if they are about a $100 CAD right now and a gen 3 is $40 they would have to drop to $60 by the end of the summer just to be net even, and Im doing a hardline build so I think I would just rather buy it use it from the start but I appreciate the comment

Fractal Define R6 are still bouncing around out there and the white case is actually white and black

Ah thank you, I searched on Amazon.ca as I am in Canada and that didn’t show up but that link ships to Canada so that will be fine, thank you

Any suggestion a gen 4.0 riser cable that has right angle mount on the gpu side? Im only running a 2060 right now but if im gonna buy one I would rather just get gen 4 now so I am not rebuying it in 6 months. Links are appreciated

I havent had one in my hands yet so I am not sure, I previously used a P5 case, you cant get an easier case to work with for a first time custom loop builder

I just looked at your case, you can set the pump res in the back 120mm spot, then set your front fans as intake and your top fans as outlet and you are good to go with your current case. You have a good path to go down

If you buy the corsair kit it comes with a pump/res combo thats about the size of a 120mm fan. Its what Im using in my next build next month https://www.corsair.com/ca/en/Categories/Products/Custom-Cooling/Pump-Reservoir/Hydro-X-Series-XD3-RGB-Pump-Reservoir-Combo/p/CX-9040001-WW