hotsauce2007

Hi
 
take a look if this car needs a module to control the seat, sometimes you will need a module to wire the commands for the seat

With restarms:
 

Hi,

I´m developing one project right now, look what I´m trying to do:
I want to build one chair using one audi a8 seat, why? Because I can set the adjustments using the commands of the seat and make it warm or cold.
The seat has heater and ventilation, massage settings and adjustments for almost all the seat parts.
I found one A8 seat cheap and is working as it should, but I noticed that the deep adjustments are made in the LCD panel inside of the A8, but we can set the entire seat just connecting the PHASE and NEUTRAL to one power supply that can handle with 110v to 12v and 30A
This will work with almost all the electric seats, you just need patience and a little of help with electric diagrams.
Here is the project and some photos:


.

.
Frame

.
Seat in white version


.
Electric diagram of the Audi A8 Seat:
 

 
Diagram for wiring
 

.

Another example of wire connections:
 

Wires and external connections for the seat


.
 
Yellow = AIRBAG PLUG - don´t touch and don´t cut, just live it alone or if you have anyone to help just remove the airbag module from the seat and sell it our trow it away
 
 
Project made with one seat from BMW E46
 
 
 
Project made with one seat from Citroen
 
.
 
Engineer of the seats:
 
 
 
.

For the seat to work properly, we need to find the electrical diagram of the seat and make the connections, fortunately most of the assemblers obey a standard in the assembly / connection of the seats, where the yellow pin is for the Airbag and we should avoid the same and Airbag may be removed from the seat to prevent accidents.
Simply plug the larger wires into a 12v and 20A or 30A power source, depending on the quality / power of your seat, if you do not want a wired chair, simply put a motorcycle battery under the chair and make a charger to plug into the socket when it is empty.
To connect the seat without a car or motorcycle battery, we need a power supply with 110 or 127/220/240 for 12v 30A or 20A (depending on your seat and number of engines).

How to wire:
 
 
Just find the PHASE / NEUTRAL of the seat and turn on the PHASE and NEUTRAL of the source, do not forget to turn on the correct polarity, if you turn on the opposite the motors will turn in the counterclockwise direction
 
One project done with one BMW seat, ( google image )
 
https://s-media-cache-ak0.pinimg.com/564x/4f/b2/99/4fb2992d0d0875d8c5dd04052844828a.jpg
.
 
 
I will post more photos as soon as I finish the project.
 
My entire home and projects:
 
https://hardforum.com/threads/post-your-workstations-2016.1887080/page-8#post-1042912905
 
Thanks
 
The seat and the bases made with stainless.     .   doing the threads for the screws.     .   Done     .   Back         .   Side         .   Now I will fix the support for the battery and start with the wiring =]

With restarms:
 

Hi,

I´m developing one project right now, look what I´m trying to do:
I want to build one chair using one audi a8 seat, why? Because I can set the adjustments using the commands of the seat and make it warm or cold.
The seat has heater and ventilation, massage settings and adjustments for almost all the seat parts.
I found one A8 seat cheap and is working as it should, but I noticed that the deep adjustments are made in the LCD panel inside of the A8, but we can set the entire seat just connecting the PHASE and NEUTRAL to one power supply that can handle with 110v to 12v and 30A
This will work with almost all the electric seats, you just need patience and a little of help with electric diagrams.
Here is the project and some photos:


.

.
Frame

.
Seat in white version


.
Electric diagram of the Audi A8 Seat:
 

 
Diagram for wiring
 

.

Another example of wire connections:
 

Wires and external connections for the seat


.
 
Yellow = AIRBAG PLUG - don´t touch and don´t cut, just live it alone or if you have anyone to help just remove the airbag module from the seat and sell it our trow it away
 
 
Project made with one seat from BMW E46
 
 
 
Project made with one seat from Citroen
 
.
 
Engineer of the seats:
 
 
 
.

For the seat to work properly, we need to find the electrical diagram of the seat and make the connections, fortunately most of the assemblers obey a standard in the assembly / connection of the seats, where the yellow pin is for the Airbag and we should avoid the same and Airbag may be removed from the seat to prevent accidents.
Simply plug the larger wires into a 12v and 20A or 30A power source, depending on the quality / power of your seat, if you do not want a wired chair, simply put a motorcycle battery under the chair and make a charger to plug into the socket when it is empty.
To connect the seat without a car or motorcycle battery, we need a power supply with 110 or 127/220/240 for 12v 30A or 20A (depending on your seat and number of engines).

How to wire:
 
 
Just find the PHASE / NEUTRAL of the seat and turn on the PHASE and NEUTRAL of the source, do not forget to turn on the correct polarity, if you turn on the opposite the motors will turn in the counterclockwise direction
 
One project done with one BMW seat, ( google image )
 
https://s-media-cache-ak0.pinimg.com/564x/4f/b2/99/4fb2992d0d0875d8c5dd04052844828a.jpg
.
 
 
I will post more photos as soon as I finish the project.
 
My entire home and projects:
 
https://hardforum.com/threads/post-your-workstations-2016.1887080/page-8#post-1042912905
 
Thanks
 
The seat and the bases made with stainless.     .   doing the threads for the screws.     .   Done     .   Back         .   Side         .   Now I will fix the support for the battery and start with the wiring =]

You can find those seats cheap on ebay, its easy to find and wire if you buy from audi A5 / A6, A8 is more complicated.
 
=]
 

Hi,

I´m developing one project right now, look what I´m trying to do:
I want to build one chair using one audi a8 seat, why? Because I can set the adjustments using the commands of the seat and make it warm or cold.
The seat has heater and ventilation, massage settings and adjustments for almost all the seat parts.
I found one A8 seat cheap and is working as it should, but I noticed that the deep adjustments are made in the LCD panel inside of the A8, but we can set the entire seat just connecting the PHASE and NEUTRAL to one power supply that can handle with 110v to 12v and 30A
This will work with almost all the electric seats, you just need patience and a little of help with electric diagrams.
Here is the project and some photos:


.

.
Frame

.
Seat in white version


.
Electric diagram of the Audi A8 Seat:
 

 
Diagram for wiring
 

.

Another example of wire connections:
 

Wires and external connections for the seat


.
 
Yellow = AIRBAG PLUG - don´t touch and don´t cut, just live it alone or if you have anyone to help just remove the airbag module from the seat and sell it our trow it away
 
 
Project made with one seat from BMW E46
 
 
 
Project made with one seat from Citroen
 
.
 
Engineer of the seats:
 
 
 
.

For the seat to work properly, we need to find the electrical diagram of the seat and make the connections, fortunately most of the assemblers obey a standard in the assembly / connection of the seats, where the yellow pin is for the Airbag and we should avoid the same and Airbag may be removed from the seat to prevent accidents.
Simply plug the larger wires into a 12v and 20A or 30A power source, depending on the quality / power of your seat, if you do not want a wired chair, simply put a motorcycle battery under the chair and make a charger to plug into the socket when it is empty.
To connect the seat without a car or motorcycle battery, we need a power supply with 110 or 127/220/240 for 12v 30A or 20A (depending on your seat and number of engines).

How to wire:
 
 
Just find the PHASE / NEUTRAL of the seat and turn on the PHASE and NEUTRAL of the source, do not forget to turn on the correct polarity, if you turn on the opposite the motors will turn in the counterclockwise direction
 
One project done with one BMW seat, ( google image )
 
https://s-media-cache-ak0.pinimg.com/564x/4f/b2/99/4fb2992d0d0875d8c5dd04052844828a.jpg
.
 
 
I will post more photos as soon as I finish the project.
 
My entire home and projects:
 
https://hardforum.com/threads/post-your-workstations-2016.1887080/page-8#post-1042912905
 
Thanks
 
The seat and the bases made with stainless.     .   doing the threads for the screws.     .   Done     .   Back         .   Side         .   Now I will fix the support for the battery and start with the wiring =]

We found how to turn on the ventilation and probably the heating, I will post some news soon...

Hi,

I´m developing one project right now, look what I´m trying to do:
I want to build one chair using one audi a8 seat, why? Because I can set the adjustments using the commands of the seat and make it warm or cold.
The seat has heater and ventilation, massage settings and adjustments for almost all the seat parts.
I found one A8 seat cheap and is working as it should, but I noticed that the deep adjustments are made in the LCD panel inside of the A8, but we can set the entire seat just connecting the PHASE and NEUTRAL to one power supply that can handle with 110v to 12v and 30A
This will work with almost all the electric seats, you just need patience and a little of help with electric diagrams.
Here is the project and some photos:


.

.
Frame

.
Seat in white version


.
Electric diagram of the Audi A8 Seat:
 

 
Diagram for wiring
 

.

Another example of wire connections:
 

Wires and external connections for the seat


.
 
Yellow = AIRBAG PLUG - don´t touch and don´t cut, just live it alone or if you have anyone to help just remove the airbag module from the seat and sell it our trow it away
 
 
Project made with one seat from BMW E46
 
 
 
Project made with one seat from Citroen
 
.
 
Engineer of the seats:
 
 
 
.

For the seat to work properly, we need to find the electrical diagram of the seat and make the connections, fortunately most of the assemblers obey a standard in the assembly / connection of the seats, where the yellow pin is for the Airbag and we should avoid the same and Airbag may be removed from the seat to prevent accidents.
Simply plug the larger wires into a 12v and 20A or 30A power source, depending on the quality / power of your seat, if you do not want a wired chair, simply put a motorcycle battery under the chair and make a charger to plug into the socket when it is empty.
To connect the seat without a car or motorcycle battery, we need a power supply with 110 or 127/220/240 for 12v 30A or 20A (depending on your seat and number of engines).

How to wire:
 
 
Just find the PHASE / NEUTRAL of the seat and turn on the PHASE and NEUTRAL of the source, do not forget to turn on the correct polarity, if you turn on the opposite the motors will turn in the counterclockwise direction
 
One project done with one BMW seat, ( google image )
 
https://s-media-cache-ak0.pinimg.com/564x/4f/b2/99/4fb2992d0d0875d8c5dd04052844828a.jpg
.
 
 
I will post more photos as soon as I finish the project.
 
My entire home and projects:
 
https://hardforum.com/threads/post-your-workstations-2016.1887080/page-8#post-1042912905
 
Thanks
 
The seat and the bases made with stainless.     .   doing the threads for the screws.     .   Done     .   Back         .   Side         .   Now I will fix the support for the battery and start with the wiring =]

If you just need one chair with car seat, that is what you want 
 
https://s-media-cache-ak0.pinimg.com/564x/4f/b2/99/4fb2992d0d0875d8c5dd04052844828a.jpg

If you just need one chair with car seat, that is what you want 
 
https://s-media-cache-ak0.pinimg.com/564x/4f/b2/99/4fb2992d0d0875d8c5dd04052844828a.jpg

Hi,

I´m developing one project right now, look what I´m trying to do:
I want to build one chair using one audi a8 seat, why? Because I can set the adjustments using the commands of the seat and make it warm or cold.
The seat has heater and ventilation, massage settings and adjustments for almost all the seat parts.
I found one A8 seat cheap and is working as it should, but I noticed that the deep adjustments are made in the LCD panel inside of the A8, but we can set the entire seat just connecting the PHASE and NEUTRAL to one power supply that can handle with 110v to 12v and 30A
This will work with almost all the electric seats, you just need patience and a little of help with electric diagrams.
Here is the project and some photos:


.

.
Frame

.
Seat in white version


.
Electric diagram of the Audi A8 Seat:
 

 
Diagram for wiring
 

.

Another example of wire connections:
 

Wires and external connections for the seat


.
 
Yellow = AIRBAG PLUG - don´t touch and don´t cut, just live it alone or if you have anyone to help just remove the airbag module from the seat and sell it our trow it away
 
 
Project made with one seat from BMW E46
 
 
 
Project made with one seat from Citroen
 
.
 
Engineer of the seats:
 
 
 
.

For the seat to work properly, we need to find the electrical diagram of the seat and make the connections, fortunately most of the assemblers obey a standard in the assembly / connection of the seats, where the yellow pin is for the Airbag and we should avoid the same and Airbag may be removed from the seat to prevent accidents.
Simply plug the larger wires into a 12v and 20A or 30A power source, depending on the quality / power of your seat, if you do not want a wired chair, simply put a motorcycle battery under the chair and make a charger to plug into the socket when it is empty.
To connect the seat without a car or motorcycle battery, we need a power supply with 110 or 127/220/240 for 12v 30A or 20A (depending on your seat and number of engines).

How to wire:
 
 
Just find the PHASE / NEUTRAL of the seat and turn on the PHASE and NEUTRAL of the source, do not forget to turn on the correct polarity, if you turn on the opposite the motors will turn in the counterclockwise direction
 
One project done with one BMW seat, ( google image )
 
https://s-media-cache-ak0.pinimg.com/564x/4f/b2/99/4fb2992d0d0875d8c5dd04052844828a.jpg
.
 
 
I will post more photos as soon as I finish the project.
 
My entire home and projects:
 
https://hardforum.com/threads/post-your-workstations-2016.1887080/page-8#post-1042912905
 
Thanks
 
The seat and the bases made with stainless.     .   doing the threads for the screws.     .   Done     .   Back         .   Side         .   Now I will fix the support for the battery and start with the wiring =]