Kyaku

He knows what 2Pac knows times four

Ive been super lazy to post these photos, i apologize.
 
Here they are!
 

 

 

 

 


 
 

Ive been super lazy to post these photos, i apologize.
 
Here they are!
 

 

 

 

 


 
 

Wheres the fun in that?

unfortunately my girlfriend accidentally formatted the CF card with all my painting Log, so i only have the post painting photos now, im 90% done now, just waiting for a last shipment from LutroO Customs for some sleeving i ended up running out on. It'll be in this week. So i do have some photos of the motherboard shield i painted, the case and back plate etc... And some leak testing, i bought used fans which turned out not to work  :angry:. So i ended up buying some sickleflows instead, the whole fan process was a pain because after installing them, i found out they were 35mm fans ( the muffin Dc's) so had to buy 6-32 2 inches, cause they didnt make 1.75 inches, and bought a bunch of washers to fill the extra gap, after i started to leak test the system, i found out the fans werent working, so i hard to drain it, and redo it all....Lucky thing is i sprung a leak while leak testing, found out these res have to a certain way, so i HAVE to have the inlet and outlet at the bottom and the fillport top, so i had to flip it around, cause it was causing a whirlpool effect, also it sprung a leak at the bottom  cap, after flipping it around, it stopped leaking, but i cant fill the res to the top or it will leak from the fill port side cap, so much headaches.  Heres the photos of the progress.
 
Heres the mobo i upgraded to, my old mobo was having problems.
 


 
This is with the old fans

 
Mounted old res position

 
Gpu mounted, you can see the backplate painted in this photo

 
Running the tubing in this photo

 
installing the homemade shroud

 
With the window installed

 
Leak testing with new fans and new res position


 
 
Ill have completed project later this week, when i get my sleeving in, Sorry for the long wait.

unfortunately my girlfriend accidentally formatted the CF card with all my painting Log, so i only have the post painting photos now, im 90% done now, just waiting for a last shipment from LutroO Customs for some sleeving i ended up running out on. It'll be in this week. So i do have some photos of the motherboard shield i painted, the case and back plate etc... And some leak testing, i bought used fans which turned out not to work  :angry:. So i ended up buying some sickleflows instead, the whole fan process was a pain because after installing them, i found out they were 35mm fans ( the muffin Dc's) so had to buy 6-32 2 inches, cause they didnt make 1.75 inches, and bought a bunch of washers to fill the extra gap, after i started to leak test the system, i found out the fans werent working, so i hard to drain it, and redo it all....Lucky thing is i sprung a leak while leak testing, found out these res have to a certain way, so i HAVE to have the inlet and outlet at the bottom and the fillport top, so i had to flip it around, cause it was causing a whirlpool effect, also it sprung a leak at the bottom  cap, after flipping it around, it stopped leaking, but i cant fill the res to the top or it will leak from the fill port side cap, so much headaches.  Heres the photos of the progress.
 
Heres the mobo i upgraded to, my old mobo was having problems.
 


 
This is with the old fans

 
Mounted old res position

 
Gpu mounted, you can see the backplate painted in this photo

 
Running the tubing in this photo

 
installing the homemade shroud

 
With the window installed

 
Leak testing with new fans and new res position


 
 
Ill have completed project later this week, when i get my sleeving in, Sorry for the long wait.

Heres a small update, some pics of the rad hole i cut at the top, pictures of the shroud being made, and most of the parts arrived, This week i'll be painting while waiting for the final parts which are the pump top, fans, tubing. Hopefully ill be completely done at the end of the week. Excuse the watermark at the right corner, i forgot to change that in lightroom.
 
 
 
Top of the case after filing

 
Working on the shroud, bending aluminum is a bitch

 
Half the Sleeving Done

 
Just finished cutting the top.
 

 
Most of the parts for the cooling loop

 
Closer look

 
The new v3, hopefully its awesome

 
The res

 
The shroud almost complete

 
The outside of the case getting ready to be painted.

 

Heres a small update, some pics of the rad hole i cut at the top, pictures of the shroud being made, and most of the parts arrived, This week i'll be painting while waiting for the final parts which are the pump top, fans, tubing. Hopefully ill be completely done at the end of the week. Excuse the watermark at the right corner, i forgot to change that in lightroom.
 
 
 
Top of the case after filing

 
Working on the shroud, bending aluminum is a bitch

 
Half the Sleeving Done

 
Just finished cutting the top.
 

 
Most of the parts for the cooling loop

 
Closer look

 
The new v3, hopefully its awesome

 
The res

 
The shroud almost complete

 
The outside of the case getting ready to be painted.

 

Heres some work done so far, still need to cut the top of the case then paint it all.



Heres the colour scheme i went with for the sleeving.


 
 
Still working on our studio, so i have little time. Should be able to upload pics of case finally done and painted with shroud. And then the actual build itself.

Wheres the fun in that?

Wheres the fun in that?

Wheres the fun in that?

They arent that great of IEMs though, Black fridays sale on monster turbine copper pros and miles davis iems for $99.99 Canadian were a much better deal. If you're in the market for some iem's i suggest waiting 9 days for boxing day sales in Canada, im possitive you can buy online.

i love how the gpu box is bigger than the case

Have you ordered this? my local computer store sells this on clearance for $4.00 ...... if you cover the shipping costs i can send this over, im sure itll still save you quite a bit... let me know. i pmed you the link to the item.

imo shave some money with the 500gb go with a 256, get rid of the h100i, and add a bit more, then you got a real fun project with the water cooling