LiMz

Not sure if this is the correct place to post but Sonos has sent over stuff to review and I think Linus still has the Arc + Sub in his new house. This is a long post but I think only the LTT Team can help out here. Sonos has pretty much evaded helping out their users on a near 3 year old bug. In a nutshell if you have an XBSX or AppleTV and have Dolby Atmos enabled, while watching Atmos content there is a massive pop sound which I imagine is what Thanos flatulence sounds like post a week of hot Indian food, follwed by the arc / beam gen2 dropping all audio until you restart it. Here's a user demonstrating it: This also affects the new ERA Speakers as well btw. This forum thread: https://en.community.sonos.com/home-theater-229129/sonos-arc-loud-pop-then-audio-loss-6852340 has been opened nearly 3 years ago with many many people going through Sonos same procedure of submitting diagnostics and hearing the same "we're working on it" story. Their official guidance is to switch off Atmos to remedy the situation. Amazing. This issue has been called out by The Verge: https://www.theverge.com/2023/8/10/23824258/sonos-arc-dolby-atmos-problems-loud-audio-pop#:~:text=Hundreds of Sonos Arc owners,gaming%2C console%2C and tech. And Ars Technica: https://arstechnica.com/gadgets/2023/08/sonos-has-been-unable-to-fix-arc-soundbars-pop-of-death-for-over-2-years/ Sonos have recently discontinued their email support and users that have called in were advised: The problem has been diagnosed and is very repeatable, has been covered by other tech productions, but hoping the LTT team can maybe weigh in an help Sonos speak up? Once again, I know they may not be a direct channel sponsor but they surely have provided review items for LTT and Short Circuit reviews. send help pls :)

Was so looking forward to this. They worked really hard on this build and to have it messed up in shipping is sad.

Saw it on a truck yesterday. Could swear I’ve seen it somewhere before!

I blame load shedding. Claim from Eskom

Sounds like definitely your PSU that is faulty. best would be to test with another PSU to be honest. If you unplug all peripherals like hard drives etc does it have the same issue? To make sure nothing is shorting your board in your case you can see if it posts outside of the chassis. So take the board out and put it on a box, plug in the PSU only and try powering it on. to check that your PSU isn’t acting up / dead (which is weird as it is powering up) you can do the paper clip test. Unplug it from the wall and switch it to Zero. Take a ppaperclip and plug it into pin16 and any other black pin. Plug it in Switch the power supply to 1. Does it come on first time?

Hello guys. studied Computer science but i took the business analysis route. I help companies through the SDLC and my current project is microservice based using all the technologies you guys are using like: Docker NodeJS Angular .NETCore AWS MongoDB TFS Rancher Prometheus and many more. . We're also using agile methodologies specifically SCRUM. Not looking for pay but would love to contribute where i can. let me know if i can help in any way

Build a FreeNAS box. the OS is free. NAS is solid You can install a Unifi Docker container This server comes in at around a hundred quid http://www.serversplus.com/servers/tower_servers/hp_tower_servers/819185-421 However you will need to do some research on the drives you need. I do not recommend using used Hard Drives for your NAS. WD Purple are meant for surveillance WD Reds are made for NAS I do think the Reds will be okay though.

Many Linux Distro's with KVM should allow this. Check that your hardware supports VT-x AND VT-d you will need IOMMU pass through for your Guest OS's to have access to the GPUs. Yes GPUs (plural). You need to be a little comfortable with the unix command line interface aswell. PROXMOX is a free and open source Hypervisor that may work. https://pve.proxmox.com/wiki/Pci_passthrough Give it a shot!

Looking to build a NAS? Want enterprise grade RAID solution for your precious data? Looking to get into Virtualization and the wonderful world of Docker? Here's my sales pitch: I can highly recommend FreeNAS Corral. There's quite a lot of info on how to get started, but I thought it might be useful to share some tutorials i've done to help get people started: I've done tutorials on: Corral + Docker https://forums.freenas.org/index.php?threads/docker-tutorial.52017/ Corral + Docker + PLEX https://forums.freenas.org/index.php?threads/freenas-corral-docker-plex-container-howto.51780/unread Corral + Docker + Crashplan https://forums.freenas.org/index.php?threads/freenas-corral-crashplan-docker-container-howto.51778/ Corral + Windows 10 VM https://forums.freenas.org/index.php?threads/windows-10-in-a-freenas-bhyve-vm-howto.51896/ If you want to use Docker and VMs make sure your hardware supports VT-x (if you're on the blue team) OR AMD-v (if you're on the red team) Good luck!

I have upgraded to Corral and although there are some cases where people have had issues. Having Docker + bhyve is much better in my opinion. 9.10 is a very mature OS but i recommend Corral for your needs definitely! It's also very pretty =) I've done tutorials on: Corral + Docker https://forums.freenas.org/index.php?threads/docker-tutorial.52017/ Corral + Docker + PLEX https://forums.freenas.org/index.php?threads/freenas-corral-docker-plex-container-howto.51780/unread Corral + Docker + Crashplan https://forums.freenas.org/index.php?threads/freenas-corral-crashplan-docker-container-howto.51778/ Corral + Windows 10 VM https://forums.freenas.org/index.php?threads/windows-10-in-a-freenas-bhyve-vm-howto.51896/ help yourself!

Love the good ole speculation. Views are what keeps every channel alive, and if Linus has to ride the meta then so be it. I think it's a little more than More employees = more salary = I need more views = I need to make a thumbnail that is embarrassing to myself and all my subscribers. Not that I know Linus personally but something like changing the entire template for the video thumbnail was definitely more calculated and probably more prompted than a water cooler conversation. Do I like the thumbnails? No. They are repulsive, stupid and caused me to vomit a little in my mouth. Do I blame Linus? No. But if I were in his shoes, and my audience has now changed substantially and I needed to do this to increase viewers, I'd think about it. Not for too long but I'd definitely think about it. aside from that it's his channel and until I have a channel with over 3.5Million subs I will have to shut up =)

Stock Lenovo Keyboard and Mouse. I do have a wrist pad though, So i've got that going for me

Having it so close to the wall is brilliant. No having to play hopscotch to avoid faceplanting either yourself or the protector. That's if you don't have a ceiling mount of course.

"In the Tibetan philosophy, Sylvia Plath sense of the word. I know we’re all dying. But you’re not dying the way Chloe back there is dying." - Tyler Durden

if you're just using for backups, you don't really care about performance and you don't want to go the freeNAS route: Maybe pickup a synology /QNAP device http://www.newegg.com/Product/Product.aspx?Item=N82E16822108236&cm_re=synology-_-22-108-236-_-Product again don't cheap out on the drives go for WD RED's http://www.newegg.com/Product/Product.aspx?Item=N82E16822236599&cm_re=wd_red-_-22-236-599-_-Product If you get 2 x hard drives you can set it to RAID 1. This will give you no speed increase but added redundancy as the drives will be mirrored. ie. if one drive fails you will still have your data