Koverhar

Build is finished now. Thanks for following me. Time to hope for a mod of the month nomination!  You've been a lovely community for my first project and I will continue with this hobby and take it further. I hope you will follow then again as you did now.

Pictures in no particular order
































Husky bongs

My pc won the Dreamhack Summer 2018 Masters modding competition!!

Final photos of the computer and finish of the build will come in the start of next month. I wanna thank everyone at the Dreamhack crew for helping me move this monster back and forth. Special thanks to Erik, DH Pontus and Alfred you know who you are 

 

Hello dear readers,
 
First off I failed and posted this on the wrong forum thread. Im sorry linus!
 
 
This build has been on sweclockers.com a while but I felt like I had to reach a bigger audience so here goes. 
A bit over a year ago I started with my first major modding/custom project. The idea here is to make a seriously hardcore hardwood and steel computertable which looks effortless yet elegant. You'll be the judge of the result but let's get started shall we.
 
Parts:
 
CPU:    I7-5960x
GPU's: 3xgtx something (depending on what I can get my hands on when I install the parts)
MoBo:  Rampage 5 extreme
RAM: Dominator platinum 32 gb
PSU: Corsair ax1500i
Storage: 16 TB hdd space with 5 ssd. 1 with os and 4 in raid 1.
 
Watercooling:
 
Dual loops
Radiators: 2x monstah 560 superthick rads, 1x alphacool 360 60mm thick rad, 1x 140mm 60 mm thick rad All in push pull.
Pumps: 2x d5 vario with ek clear plexi top. Pvm controlled.
Reservoir: Custom dual loop
Fittings: too many to count (might do a list later)
Tubing: Ionized copper and hardbent acrylic tubing.
Extras: 6 temp meters loop flow indicators etc.
Fans: 24 Noiseblocker pk2s.
Fan controller: Lamptron fc something with them circuit bords to connect 1 radiator per knob + 1 knob for each waterpump.
 
Frame and build:
 
20mm thick quadratic steel with 3 mm plate steel. 
Wood is a mixture of birch and mahogany.
 
Sponsors:
 
None so far. 
 
Started off welding a basic frame to get ideas flowing. 
 

 
  Radiator "space"     First order arriving     One of the monstah 560 radiators with the fans on it     looking at this drawing it might be hard to believe were gonna get anywhere with this build but its fiiiine:D     after some word welding and sheet metal work I ended up here. With a place for my legs and the mounts for the side 360 rads (60mm thick)     From another angle.     Center console with gauges for temp meters and pumps. Will probably get this covered with leather or wood as well       Psu Mount. Worth adding is that I need to add rubber between all "moving" parts so the psu and pumps are therefor not welded to the frame but have separate supports where so I can soundproof them better. Again soundproofing parts with a 20dB output is a bit excessive but might as well.     And to the woodwork then. It's in its infant stage but what I did here is a guy helped me glue birch together and then drag it through a machine I dont know the name of. What I need to do is make them into the round nice wingshapes im looking for. I'm looking at a solid 200 hours of sanding and polishing here but:D  
This is the wood for the front panel and the short sides. Dimensions for the table btw is 1650x780x190.
 

 
Hi again, still working with the wood but here's my new atx tray. 
The caselabs sm8 something
 

 
So I've been working on the profiled wood. This longer than expected and I still have a lot of sanding to do but I feel like sharing the results. 
 
This is 2 out of 3 panels. The longer one being the front and obviously I need to cut holes for the fans and whatnot but it's getting there.
 

 

 
Here's some pictures of the upcoming reservoir. Sorry for the lack of updates but I've been very busy. 
Anyways the reservoir is a dual loop idea where it feeds and takes from the same res even though it's 2 separate loops and pumps.
 


 
Started to get the legs done for the table and lathing the mountjoints for the triple screen setup. Loving it
 

 
Some lathing for the lathers
 

 

 
And the table is ALIVE with legs. There's some angle grinding and polishing to do but it's getting there.
 

 
Next update after christmas!

Build is finished now. Thanks for following me. Time to hope for a mod of the month nomination!  You've been a lovely community for my first project and I will continue with this hobby and take it further. I hope you will follow then again as you did now.

Pictures in no particular order
































Husky bongs

My friends, it's time for an update!
 
Behold the mighty triple screen setup:D or let's call it the triple screen compatible monitor stand. I dont actually own 3 proper 4k screens yet but we'll get there.
 
I started with a huuuuge piece of steel. This sucker was 1800x120x12mm and really really heavy. Luckily weight is not a real concern for me. Strenght and quality far outweighs anything else.
 
Point here is that I can have as many screens as I wish without it looking wierd. The "sidemonitor stands" are detachable so they will not be in the way whatever setup im running.
 
Max screen size is 32inchesx3
 

 

 

 

Allthough the project is over I've started making matching gear for my pc now. It never ends does it:D So I made a custom lamp all it needs is some varnish. Metal went to the chromer yesterday. Some pictures below!
 
Some fairly hardcore materials metalwise:D Here's some 4 inch solid pipe and a 3 inch shaftsteel. 
 

 
I then proceedes to watercut and lathe everything and here's the lamp assembled.
 

 

 

 

 

Parts dissassembled and polished up for chrome!


 
Next update soon! Also I would love for you to vote for my build over at buillds.gg. We can't let an RGB case win!
https://builds.gg/builds/the-mahogany-desk-bit-tech-build-of-the-year-2018-940
 
 

Allthough the project is over I've started making matching gear for my pc now. It never ends does it:D So I made a custom lamp all it needs is some varnish. Metal went to the chromer yesterday. Some pictures below!
 
Some fairly hardcore materials metalwise:D Here's some 4 inch solid pipe and a 3 inch shaftsteel. 
 

 
I then proceedes to watercut and lathe everything and here's the lamp assembled.
 

 

 

 

 

Parts dissassembled and polished up for chrome!


 
Next update soon! Also I would love for you to vote for my build over at buillds.gg. We can't let an RGB case win!
https://builds.gg/builds/the-mahogany-desk-bit-tech-build-of-the-year-2018-940
 
 

Allthough the project is over I've started making matching gear for my pc now. It never ends does it:D So I made a custom lamp all it needs is some varnish. Metal went to the chromer yesterday. Some pictures below!
 
Some fairly hardcore materials metalwise:D Here's some 4 inch solid pipe and a 3 inch shaftsteel. 
 

 
I then proceedes to watercut and lathe everything and here's the lamp assembled.
 

 

 

 

 

Parts dissassembled and polished up for chrome!


 
Next update soon! Also I would love for you to vote for my build over at buillds.gg. We can't let an RGB case win!
https://builds.gg/builds/the-mahogany-desk-bit-tech-build-of-the-year-2018-940
 
 

Allthough the project is over I've started making matching gear for my pc now. It never ends does it:D So I made a custom lamp all it needs is some varnish. Metal went to the chromer yesterday. Some pictures below!
 
Some fairly hardcore materials metalwise:D Here's some 4 inch solid pipe and a 3 inch shaftsteel. 
 

 
I then proceedes to watercut and lathe everything and here's the lamp assembled.
 

 

 

 

 

Parts dissassembled and polished up for chrome!


 
Next update soon! Also I would love for you to vote for my build over at buillds.gg. We can't let an RGB case win!
https://builds.gg/builds/the-mahogany-desk-bit-tech-build-of-the-year-2018-940
 
 

Build is finished now. Thanks for following me. Time to hope for a mod of the month nomination!  You've been a lovely community for my first project and I will continue with this hobby and take it further. I hope you will follow then again as you did now.

Pictures in no particular order
































Husky bongs

Build is finished now. Thanks for following me. Time to hope for a mod of the month nomination!  You've been a lovely community for my first project and I will continue with this hobby and take it further. I hope you will follow then again as you did now.

Pictures in no particular order
































Husky bongs

Build is finished now. Thanks for following me. Time to hope for a mod of the month nomination!  You've been a lovely community for my first project and I will continue with this hobby and take it further. I hope you will follow then again as you did now.

Pictures in no particular order
































Husky bongs

Build is finished now. Thanks for following me. Time to hope for a mod of the month nomination!  You've been a lovely community for my first project and I will continue with this hobby and take it further. I hope you will follow then again as you did now.

Pictures in no particular order
































Husky bongs

Build is finished now. Thanks for following me. Time to hope for a mod of the month nomination!  You've been a lovely community for my first project and I will continue with this hobby and take it further. I hope you will follow then again as you did now.

Pictures in no particular order
































Husky bongs

Build is finished now. Thanks for following me. Time to hope for a mod of the month nomination!  You've been a lovely community for my first project and I will continue with this hobby and take it further. I hope you will follow then again as you did now.

Pictures in no particular order
































Husky bongs

Build is finished now. Thanks for following me. Time to hope for a mod of the month nomination!  You've been a lovely community for my first project and I will continue with this hobby and take it further. I hope you will follow then again as you did now.

Pictures in no particular order
































Husky bongs

My pc won the Dreamhack Summer 2018 Masters modding competition!!

Final photos of the computer and finish of the build will come in the start of next month. I wanna thank everyone at the Dreamhack crew for helping me move this monster back and forth. Special thanks to Erik, DH Pontus and Alfred you know who you are 

 

My pc won the Dreamhack Summer 2018 Masters modding competition!!

Final photos of the computer and finish of the build will come in the start of next month. I wanna thank everyone at the Dreamhack crew for helping me move this monster back and forth. Special thanks to Erik, DH Pontus and Alfred you know who you are 

 

My pc won the Dreamhack Summer 2018 Masters modding competition!!

Final photos of the computer and finish of the build will come in the start of next month. I wanna thank everyone at the Dreamhack crew for helping me move this monster back and forth. Special thanks to Erik, DH Pontus and Alfred you know who you are 

 

My pc won the Dreamhack Summer 2018 Masters modding competition!!

Final photos of the computer and finish of the build will come in the start of next month. I wanna thank everyone at the Dreamhack crew for helping me move this monster back and forth. Special thanks to Erik, DH Pontus and Alfred you know who you are 

 

My pc won the Dreamhack Summer 2018 Masters modding competition!!

Final photos of the computer and finish of the build will come in the start of next month. I wanna thank everyone at the Dreamhack crew for helping me move this monster back and forth. Special thanks to Erik, DH Pontus and Alfred you know who you are 

 

So I was invited to compete at the Dreamhack Masters modding competition. And some problems had to be solved so here's some pictures on how you move a pc that weighs well over 200kg when packaged

Truck coming

 

Sturdy package. about 500 screws glued waterproof and reinforced. Also coated in dampening materials on the inside

 

Up she goes!

 

 

By all accounts the lift was succesful, The build will be considered complete at the end of this month where I have some decent photos of it

 


 

Will compete with the build att Dreamhack on the 18th of June so come see me?

Not a lot left no, just gotta get the waterjet to cut out my pipe strengthener bits and get those powdercoated and final assembly can commence. Here's a small sneakpeak    

My pc won the Dreamhack Summer 2018 Masters modding competition!!

Final photos of the computer and finish of the build will come in the start of next month. I wanna thank everyone at the Dreamhack crew for helping me move this monster back and forth. Special thanks to Erik, DH Pontus and Alfred you know who you are