chitoZ

Here you are, there are more under the Templates section of the Modding FAQ. 
 
https://www.protocase.com/resources/how-to-design-for-motherboards/
 
 

man that must be aggravating, hope you get it sorted out though

so i think i will not have a full bitspower set . so i think  ill be using EK parts  and some bitspower parts instead. so what do you think guys ? ill be using 14mm tubes inside and maybe 16mm outside 

Sorry for not updating recently. I was busy at school thats why, so here you go guys this is the progress of the build.

That happens at times, sometimes one is oversized and the other is under making for a much larger difference between the two. Best is to check and see what size you have exactly for the ID of the tubing and to spec out some silicone rod that is closer to the dimension you actually have on hand. 

looks great so far and loving the layout !

Sorry for not updating recently. I was busy at school thats why, so here you go guys this is the progress of the build.

Sorry for not updating recently. I was busy at school thats why, so here you go guys this is the progress of the build.

so updates here i only manage to pic small since im to busy. so i already assembled the case and painted it with matt black but i wont show it to you guys yet since its still a mess and rushed so updates today will be placing the cpu block. i didnt expect that bykski has a nice looking block 

Build doesnt look like it has good cable management options (spacing behind the motherboard tray)
 
Even if they dont want to use extra GPU's, they might want to use a Wifi card, or a sound card, or some other PCI-E card there, which the PSU in its current position would block. (I've built 3 pc's within the last year or so that use wifi cards along side GPU's)
 
Also you dont add the L W H, you multiply them, so your volume is 29,181.6cm3, which is a very similar size to this case:
https://www.riotoro.com/products/cr1080-small-gaming-case-with-compartment-design-full-atx-support/
 
Which this of course has its own limitations, being that the cooler height and GPU height are much lower than most cases.

so updates here i only manage to pic small since im to busy. so i already assembled the case and painted it with matt black but i wont show it to you guys yet since its still a mess and rushed so updates today will be placing the cpu block. i didnt expect that bykski has a nice looking block 

so updates here i only manage to pic small since im to busy. so i already assembled the case and painted it with matt black but i wont show it to you guys yet since its still a mess and rushed so updates today will be placing the cpu block. i didnt expect that bykski has a nice looking block 

One card with smaller case
 
Reasons not to do Dual GPU mATX
A, not many people do dual GPU configurations anymore (It's less than .1%) and B, if they do use dual GPU configs, they're almost ALWAYS in ATX and up motherboard sizes, since most "standard layouts" put the PSU under the GPU's, or the motherboards put the GPU's directly next to each other, choking the top card of air.  
 

ALL HAIL THE GREAT RULER!!

hello im christian dumdum i studied entrepreneurship here in the Philippines. im starting my own business soon its a computer case . currently im thinking about creating a compact microATX case since there are many manyyyy compact pc case for miniATX users.  i was hoping if you have suggestions for my scratch design  .
 
im having trouble with 
two video card support but bigger case ( a bit expensive to create ) 
 
or
 
one video card with smaller case. ( cheaper to create ) 
 
 
(note: im not a graphic designer or what im just a modder or pc builder who wants something different and want to create a business with it but will do better soon if its finalized  ) 
update: updated layout 
 

sorry again with no updates. im stuck with my studies doing some business implementation . Im starting a case company that can give some users here a compact pc case for matx builds   also in addition i lost my pics for the build ill be reshooting them again and ill post this month 

sorry again with no updates. im stuck with my studies doing some business implementation . Im starting a case company that can give some users here a compact pc case for matx builds   also in addition i lost my pics for the build ill be reshooting them again and ill post this month 

I know how that is lol 

hello sorry for no updates . i was so busy with my studies . ill update soon ill just edit the pics 

Sleeving and first paint
Ok guys just a small update, but a colorful one at that. 24 pin cable finished as well as a few more things painted, the color is a little off in the pics due to it getting late but you get the idea.

 
Here's a better pic of the actual color taken with my phone before it got dark out

Hey everyone, sorry I haven't been able to update this I have been busy with work and school, as well as some family issues. I did however recieve a nice package in the mail. This is just a sneak peak taken with my phone, better pics will be coming soon as well as some more updates. I would like to thank bitspower for the support and without it this build wouldt have been able to happen, well it wouldn't have looked as nice anyway ?. Stayed tuned for more

i feel you bro . being a student/modder is so hard . time is so small especially for me i could only do modding for weekends 
 

this will be the parts that ill be using. updates soon i swear this time hehe  but one problem is that bykski mistakenly sent me a wrong GPU block . so maybe ill just use my old gtx 770 with a water block 

Nice, except for the wrong block part lol. I too just got my watercooling supplies in for my build courtesy of bitspower ? haven't got around to taking pics or updating my build log though, last week of this semester in school and I been too busy 

this will be the parts that ill be using. updates soon i swear this time hehe  but one problem is that bykski mistakenly sent me a wrong GPU block . so maybe ill just use my old gtx 770 with a water block