Dr_Curry_MONSTER

Ughhh, I was trying to do the 30 minute benchmark but after around 10 mins my temps went to 87*, so I stopped the test. I using Prime95 so it is really intensive but that is way too hot no? Maybe fan mounting I'm guessing I have no idea tho, because my normal load and idle temps are ok. I'll download AIDA64 and do a stress test on that but I think the stock cooler can't handle the CPU.

Alright one more thing, my idle temps are around 50-60 is that of Concern? @Prodigy_Smit i tried googling this stuff but there is nothing on my specific CPU as its the Chinese version.

Yoo, Recently just got a new PC and I've got a Ryzen 5 3500X and a 2060. I'm a bit concerned about my load temps as when I'm running Prime95 on load with stock cooler I'm getting around 78* after 5 minutes. Is that bad for my CPU??

Alright I'll give it a shot. @Moonzy

So pretty much my default res is 1440x900, the driver recognizes this too, but when I try to run at 1440x900 it says "Output Not Supported" but clearly it is, without the driver I can run 1440x900 fine. Otherwise I have to run 1600x900 1080i for some reason for it to work, its very annoying. My specs are - Xeon 1231v3 3.2 GHZ GTX 950 Galax H81M-P33 and 8GB HyperX Savage ram.

Could something be wrong with Crossfire setup? Or maybe the first card is make the second throttle. Worst case scenario, bad cooling

Easy SSD, a 1TB HDD is 30bucks, even cheaper if your lucky.

She doesn't need a $1500 Build for real estate, even if you want it to last a long time, just get an i7 4790 + 16gb ram and 750ti. Your (mum is) set.

Alright thanks, they are on stock cooling tho and when I'm playing games it doesn't go over 62C now. But I got mislead alot by people

Yeah I remounted it again and this time I'm getting 75C on full load. Thanks for your help btw

on what? I did the stress test again. Actually I might just reinstall my fan, brb. I just did the test again this time I only got 79 as peak temp. I guess I fixed it? Most of the time it was between 77 - 70. I just did it with a remount, I only got 76C max for like a milisecond rest was 65 - 75. Is that good?

I've changed the speed in the bios but in windows I don't notice ant difference in fan noise or movement speed.

But I think it might be my fan, when stress testing the fan doesn't seem to get faster, just running default speed. Is there anyway I can monitor fan speeds?

This only happens while stress testing tho, when playing games temps are 70C<

Just stock thermal paste.