Sleep issue with threadripper (Solved)

[Salacious B Crum]

Anyone have any idea why my 1950x keeps waking up when I put it to sleep I mean it literally goes to sleep and pops right back up, I've read about the mouse being hyper sensitive so things I've tried so far:

 

Disabled wake by mouse, keyboard

Checked to see if something is running in the background

 

I've got it setup in team viewer and it wakes on command but again if I put it to sleep it pops right back on I don't want it running all day only when I need it

[Dissitesuxba11s]

It might be a Wake on LAN issue. I had something similar happen a few weeks back.

 

Edit: Open the command prompt and type...

powercfg -lastwake

...to see what woke it up last.

Edited October 26, 2018 by Dissitesuxba11s

[Fasauceome]

My power supply used to do that when it was dying. Does this also happen when it's off?

[Salacious B Crum]

32 minutes ago, Dissitesuxba11s said:

It might be a Wake on LAN issue. I had something similar happen a few weeks back.

 

Edit: Open the command prompt and type...

powercfg -lastwake

...to see what woke it up last.

I did try that a few days ago but I'll reset everything and test after it wakes up as I'm not sure I did it right

[Salacious B Crum]

31 minutes ago, fasauceome said:

My power supply used to do that when it was dying. Does this also happen when it's off?

Power supply is new don't see any other issue that would point to the PSU

[Dissitesuxba11s]

2 minutes ago, mrbilky said:

I did try that a few days ago but I'll reset everything and test after it wakes up as I'm not sure I did it right

Do you remember what woke it up last time?

[Fasauceome]

2 minutes ago, mrbilky said:

Power supply is new don't see any other issue that would point to the PSU

It could be faulty, new stuff is broken sometimes, however rarely

[Salacious B Crum]

13 minutes ago, Dissitesuxba11s said:

Do you remember what woke it up last time?

It just happened again here is the diag from power shell I only have 2 PCIe devices in this rig 1 GTX 1080 and my 10GBe single port nic I have reinstalled the bios as well to see if there was an anomaly

 

PS C:\Users\mrbil> powercfg -lastwake
Wake History Count - 1
Wake History [0]
  Wake Source Count - 1
  Wake Source [0]
    Type: Device
    Instance Path: PCI\VEN_1022&DEV_1453&SUBSYS_14531022&REV_00\3&11583659&0&09
    Friendly Name:
    Description: PCI Express Root Port
    Manufacturer: (Standard system devices)
PS C:\Users\mrbil>

 

I wonder if my unRAID NAS is pushing a signal across to my pc they are peer to peer 10GBe and my ASRock x399 Taichi bios setting for wake on LAN is under PCIe

[Dissitesuxba11s]

1 minute ago, mrbilky said:

-snip-

Try this:

Device Manager > select Network Adapter(s) > Go to your Network card > go to Power Management > uncheck "Allow this device to wake up" if it's checked.

 

You might also have an update waiting to be installed so Windows is kind of forcing you to do it.

[Salacious B Crum]

Think this one is solved I deselected wake on pattern match in both adapter settings (I have 2 nics on board) that seems to have solved it wakes up correctly and puts to sleep correctly, Thanks for the help solving this one!