Jump to content

New build new problems

Doktoras
By Doktoras
in CPUs, Motherboards, and Memory
 Share
Posted

Hello there tech fanatics! Well recently i ran into a problem. I brought new pc parts etch...

i3-8100

 | KINGSTON | Fury | Gaming | DDR4 | Module capacity 8GB | 2666 MHz | CL 16 | 1.2 V 

Gygabite B360M H

New psu 600w dont remember the brand.

 

Well after pressing power button my pc starts up and suddenly shuts down. After few second it boots normally. Same thing happened with my old psu in only 2 weeks i burned ram so i got replacement for it. Now it happens again and iam afraid to burn ram again. Maybe my motherboard is bad or i did something wrong ? I am waiting for answers and help. Thx guys!

 

 

 

Link to comment
https://linustechtips.com/topic/983291-new-build-new-problems/
Share on other sites
Link to post
Share on other sites
Posted

At first boot your pc check is everything ok. Then may turn off and turn on again after auto-settings was made.

If everything will be ok, you may check all settings in BIOS. Probably you can find some options to disable testing ram/oc/etc. at start.

 

Link to comment
https://linustechtips.com/topic/983291-new-build-new-problems/#findComment-11857125
Share on other sites
Link to post
Share on other sites
Posted
  • Author
17 minutes ago, homeap5 said:

At first boot your pc check is everything ok. Then may turn off and turn on again after auto-settings was made.

If everything will be ok, you may check all settings in BIOS. Probably you can find some options to disable testing ram/oc/etc. at start.

 

I was playing gta v and it suddenly crashed after that i started to get memory management errors and bsod. Now i got replacement and im afraid to burn ram again. But before that i only used 4pin connector to mobo now i have 8 pin

 

Link to comment
https://linustechtips.com/topic/983291-new-build-new-problems/#findComment-11857183
Share on other sites
Link to post
Share on other sites
Posted

Do you have an overclock on your Ram? If not then this should not be an issue as the voltages are regulated, you could be suffering from a different issue. My Psu boots twice as i have an overclock on my ram and cpu. If you are sure it is your memory then you had best run memtest or windows memory checker. This takes time so be patient. My set of ram had an issue and games and programs would crash after a few moments. Since i have my replacement i have had no issues. Memcheck is the better option FYI.

My Current Build: https://uk.pcpartpicker.com/list/36jXwh

 

CPU: AMD - Ryzen 5 3600X | CPU Cooler: Corsair H150i PRO XT | Motherboard: Asus - STRIX X370-F GAMING | RAM: G.SKILL Trident Z RGB 2x8Gb DDR4 @3000MHz | GPU: Gigabyte - GeForce RTX 2080 Ti 11 GB AORUS XTREME Video Card | Storage: Samsung - 860 EVO 250GB M.2-2280 - Sandisk SSD 240GB - Sandisk SSD 1TB - WD Blue 4TB| PSU: Corsair RM (2019) 850 W 80+ Gold Certified Fully Modular ATX Power Supply | Case: Corsair - Corsair Obsidian 500D RGB SE ATX Mid Tower Case | System Fans: Corsair - ML120 PRO RGB 47.3 CFM 120mm x 4 & Corsair - ML140 PRO RGB 55.4 CFM 140mm x 2 | Display: Samsung KS9000 |Keyboard: Logitech - G613 | Mouse: Logitech - G703 | Operating System: Windows 10 Pro

Link to comment
https://linustechtips.com/topic/983291-new-build-new-problems/#findComment-11857257
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×