ram Memtest error

[Ccem]

Hello, so I got completely new rig. But I got BSOD when I play for 5 mins. I reinstalled win 10, drivers and bios is up do date. Tried everything until I did memtest64. When installed both rams I did memtest and got errors. Yesterday u got like 714 errors with both. 

specs are:

i7700k

msi z270l gaming carbon pro ac

gskill trident z 16gb 2400mhz 2x8.

EVGA 600w non modular psu.

So I ran the memtest on both rams one by one and there was no errors. I ran them for 20 mins each , usually the errors occurred after 5 mins with them both together. Both was tested on the same slot, so the must be fine.
And when I wanted to test the other slot I realized that the 24 pin connector is pushing the ram aside softly maybe 5° (not hardly).
The backside of the 24 pin is a bit thick and the ram modules are also thick. PSU EVGA 600w non modular and drams are gskill trident z. Do you guys think this is the problem ? I haven't tested this slot alone yet but I think the connector may interfere the rams ?
Thank you

[FuzzyLogic]

I don't think that would cause your problems; try using just one of the RAM sticks in the left slot and see if the errors come up again.

[Radium_Angel]

14 minutes ago, Ccem said:

Do you guys think this is the problem

No, I've done worse and had no issues. Unless the RAM is bad to begin with, slight pressure like that won't cause issues.

[Ccem]

Thanks for reply

I tested both rams alone for 20 mins. Maybe the slot on the mobo is gone ? I will test the other slot when I go home. I did also the software test and no errors. So it may be the hardwares.

[Ccem]

Update: I got the external atx 24 pin cable, i ran the memtest and it shows no errors. Everything is good hopefully.  Thank you all.

[Ccem]

Update: I got the external atx 24 pin cable, i ran the memtest and it shows no errors. Everything is good hopefully.  Thank you all.