Help with optimal overclock please

[ChickenSnitt]

It's using 1.275volts on 45mhz and I get -1 but 0 warnings error as you can see after 3 minutes . What is that and what should I lower or raise? 

should I change it to 1.260 volts and lower it to 44 mhz or ?

My build is described below and stats attatched.

[iRileyx]

lower to 4.4Ghz but keep the voltage the same, see if you get the same error.

 

4.5 at 1.275 should be achievable though, you might have lost the silicon lottery.

[ChickenSnitt]

7 minutes ago, RKRiley said:

lower to 4.4Ghz but keep the voltage the same, see if you get the same error.

 

4.5 at 1.275 should be achievable though, you might have lost the silicon lottery.

by that you mean the silicon lining is shit?

i'll try 4.4ghz and see. Was watching a review and the guy put it at 1.260 volts. Should I try that also? @RKRiley

[ChickenSnitt]

 

I'm learning and thanks for the help so far. Atleast I didn't get screwed over here. By the way why does it say op next to my name ? 

Also it's on 1.260 volts with 4.3ghz with max temps no higher than 71 after 30 minutes.