Jump to content

8700k OC help/questions

O9B0666
 Share
Posted

So, after tons of reading and watching many videos, i was able to get my 5.0ghz OC stable on my gigabyte board stable at 1.37v, and LKLc set to turbo. This seems alarmingly high, seeing others have 1.28-1.33v with a 5ghz oc. No one i have seen has had to set so high. I know it's a lottery, but should i worry with this much volatge? I was able to get 5.3 stable at 1.395v, and 4.9 stable at 1.35v. I dont have to have a 5ghz OC as i dont play many demanding games lately/at the moment, but i wanted to see what it would take. Cinbench ran 1581 multi core and single 215 at the 5ghz OC Which went up 12, and 5 respectavily from the 4.9ghz i ran. I think im going to delid, current idle temps at 5ghz are 40-42c but my cpu temps are wonly at idle. I will run some firestrike then some mor etaxing benches to make sure of this.

Firestrike 
i7-8700k @5.0GHz w/ 1.30v, Corsair h100iv2, Gigabye Aorus gaming 7, 16GB(8x2) 2666MHz ddr4, Dual RX470's OC'd to 1390mhz(atm) in corssfire - liguid cooled with corsair h60's, 3.25 TB in Samsung SSD's, anidees white crystal cube case 

 

Retired:
i5-4440k @3.2GHz, gigabyte ga-z87x-ud5h z87, 24GB DDR3, 3x1TB Seagate Baracuda HDD.

Link to comment
https://linustechtips.com/topic/932825-8700k-oc-helpquestions/
Share on other sites
Link to post
Share on other sites
Posted

Is this voltage what you entered into the BIOS? Or is it a reading of vcore when CPU is under stress test?

 

Is LLC turned on?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/932825-8700k-oc-helpquestions/#findComment-11398034
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I had to maily type Turbo insto load line cal. as when i try toi change it all i can do is type, their's no pop up box or drop down menu. and yes i mainly typed these settings. Going up 1.35 1.355 1.356 etc until no crash in cinebench (which i know is not a end all be all test but its a starting to test a stable oc)

Firestrike 
i7-8700k @5.0GHz w/ 1.30v, Corsair h100iv2, Gigabye Aorus gaming 7, 16GB(8x2) 2666MHz ddr4, Dual RX470's OC'd to 1390mhz(atm) in corssfire - liguid cooled with corsair h60's, 3.25 TB in Samsung SSD's, anidees white crystal cube case 

 

Retired:
i5-4440k @3.2GHz, gigabyte ga-z87x-ud5h z87, 24GB DDR3, 3x1TB Seagate Baracuda HDD.

Link to comment
https://linustechtips.com/topic/932825-8700k-oc-helpquestions/#findComment-11398058
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×