Jump to content

Is that safe? Help

AkramMax
6 minutes ago, AkramMax said:

I have a little scratch in my motherboard and i decide to cover the scratch with a clear nail polish and the covred area turn to visible copper traces is that safe ?

The nail polish cause that?

Please help me ????imageproxy.php?img=&key=17c10421afdc6db8imageproxy.php?img=&key=17c10421afdc6db8

Photos link:

https://drive.google.com/file/d/1Ue1HlSKE0oH8PABIwikIyXyICxoMtzOs/view?usp=drivesdk

Yes.  Don't touch anything against it, but it should be fine.

Link to comment
Share on other sites

Link to post
Share on other sites

Of course it's not. It basically eats away the board itself. I dont know whether it's the solvent of the nail polish or the nail polish itself, but it's definitely not a good sign. Hope it dries up fast.

 

NExt time when you see a scratch, just leave it alone and dont touch it. Doesnt seem to be in a critical place where a short could happen easily.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

That's probably not good for the motherboard, but as long as the nail polish isn't conductive and everything still works, I think it's fine.

Quote me to see my reply!

SPECS:

CPU: Ryzen 7 3700X Motherboard: MSI B450-A Pro Max RAM: 32GB I forget GPU: MSI Vega 56 Storage: 256GB NVMe boot, 512GB Samsung 850 Pro, 1TB WD Blue SSD, 1TB WD Blue HDD PSU: Inwin P85 850w Case: Fractal Design Define C Cooling: Stock for CPU, be quiet! case fans, Morpheus Vega w/ be quiet! Pure Wings 2 for GPU Monitor: 3x Thinkvision P24Q on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: Focus FK-9000 (heavily modded) Mousepad: Aliexpress cat special Headphones:  Sennheiser HD598SE and Sony Linkbuds

 

🏳️‍🌈

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, AkramMax said:

I have a little scratch in my motherboard and i decide to cover the scratch with a clear nail polish and the covred area turn to visible copper traces is that safe ?

The nail polish cause that?

Please help me ????imageproxy.php?img=&key=17c10421afdc6db8imageproxy.php?img=&key=17c10421afdc6db8

Photos link:

https://drive.google.com/file/d/1Ue1HlSKE0oH8PABIwikIyXyICxoMtzOs/view?usp=drivesdk

That was a dumb thing to do, but as long as you don't add more, or have those parts come into contact with other metal, you *should* be ok....

NOTE: I no longer frequent this site. If you really need help, PM/DM me and my e.mail will alert me. 

Link to comment
Share on other sites

Link to post
Share on other sites

I think it will be fine.
If anything you shouldn't have used nail polish, electrical tap would have been better.

 

If worse comes then you'll lose a dim slot or two.

It's not a race to the bottom.

Link to comment
Share on other sites

Link to post
Share on other sites

22 hours ago, kelvinhall05 said:

That's probably not good for the motherboard, but as long as the nail polish isn't conductive and everything still works, I think it's fine.

Thanks but i should be ok i dont have to replace the motherboard?

Link to comment
Share on other sites

Link to post
Share on other sites

21 hours ago, 0x1e said:

I think it will be fine.
If anything you shouldn't have used nail polish, electrical tap would have been better.

 

If worse comes then you'll lose a dim slot or two.

I dont have to replace the motherboard ? 

Link to comment
Share on other sites

Link to post
Share on other sites

22 hours ago, Radium_Angel said:

That was a dumb thing to do, but as long as you don't add more, or have those parts come into contact with other metal, you *should* be ok....

Thanks man but i dont have to replace the motherboard

Link to comment
Share on other sites

Link to post
Share on other sites

9 minutes ago, AkramMax said:

Thanks but i should be ok i dont have to replace the motherboard?

If everything works, no.

Quote me to see my reply!

SPECS:

CPU: Ryzen 7 3700X Motherboard: MSI B450-A Pro Max RAM: 32GB I forget GPU: MSI Vega 56 Storage: 256GB NVMe boot, 512GB Samsung 850 Pro, 1TB WD Blue SSD, 1TB WD Blue HDD PSU: Inwin P85 850w Case: Fractal Design Define C Cooling: Stock for CPU, be quiet! case fans, Morpheus Vega w/ be quiet! Pure Wings 2 for GPU Monitor: 3x Thinkvision P24Q on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: Focus FK-9000 (heavily modded) Mousepad: Aliexpress cat special Headphones:  Sennheiser HD598SE and Sony Linkbuds

 

🏳️‍🌈

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, kelvinhall05 said:

If everything works, no.

Its works fine no overheating no thing its good

Link to comment
Share on other sites

Link to post
Share on other sites

42 minutes ago, AkramMax said:

Its works fine no overheating no thing its good

Yes.

Quote me to see my reply!

SPECS:

CPU: Ryzen 7 3700X Motherboard: MSI B450-A Pro Max RAM: 32GB I forget GPU: MSI Vega 56 Storage: 256GB NVMe boot, 512GB Samsung 850 Pro, 1TB WD Blue SSD, 1TB WD Blue HDD PSU: Inwin P85 850w Case: Fractal Design Define C Cooling: Stock for CPU, be quiet! case fans, Morpheus Vega w/ be quiet! Pure Wings 2 for GPU Monitor: 3x Thinkvision P24Q on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: Focus FK-9000 (heavily modded) Mousepad: Aliexpress cat special Headphones:  Sennheiser HD598SE and Sony Linkbuds

 

🏳️‍🌈

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×