Display problem

[P2g]

Hello.

 

I just finished building my new PC. I turned the PC on and there is nothing on the screen. Everything is working from inside and the GPUs led is working but the gpu fans were not spinnign. Any solution?

 

Build:

Ryzen 7 2700x

Asus Strix 1070 ti 8gb

16ram

650W

Ax370 k3

 

Thanks

[JakeJigsaw]

Take out the GPU, plug video cables into the motherboard, boot into windows.

Download Geforce Expirence and display drivers for your card.

https://www.asus.com/us/Graphics-Cards/ROG-STRIX-GTX1070TI-A8G-GAMING/HelpDesk_Download/

 

Turn of the computer, Install the card, plug video cables into the card (NOT THE MOBO THIS TIME).

[P2g]

22 minutes ago, JakeJigsaw said:

Take out the GPU, plug video cables into the motherboard, boot into windows.

Download Geforce Expirence and display drivers for your card.

https://www.asus.com/us/Graphics-Cards/ROG-STRIX-GTX1070TI-A8G-GAMING/HelpDesk_Download/

 

Turn of the computer, Install the card, plug video cables into the card (NOT THE MOBO THIS TIME).

Nope not working ???

 

[JakeJigsaw]

18 minutes ago, P2g said:

Nope not working ???

 

does the system work without the GPU installed?

[P2g]

16 minutes ago, JakeJigsaw said:

does the system work without the GPU installed?

ye but still no picture on the monitor

[P2g]

Anyone?

[Soppro]

16 hours ago, JakeJigsaw said:

does the system work without the GPU installed?

It won't work without the GPU since the 2700X can't do display output without an iGPU. 

 

I'm guessing that the GPU fans aren't spinning up because of the stock fan curve, I looked up your GPU and below 55C the fans won't fire up. Assuming everything in your PC is working fine, there has to be a problem with either the cable you're using or the monitor. Have you tried a different cable or different port (DisplayPort, HDMI, etc.)? Maybe try a different monitor too? 

[P2g]

2 hours ago, Soppro said:

It won't work without the GPU since the 2700X can't do display output without an iGPU. 

 

I'm guessing that the GPU fans aren't spinning up because of the stock fan curve, I looked up your GPU and below 55C the fans won't fire up. Assuming everything in your PC is working fine, there has to be a problem with either the cable you're using or the monitor. Have you tried a different cable or different port (DisplayPort, HDMI, etc.)? Maybe try a different monitor too? 

Yep I changed 2 monitors, 2hdmi dvi and my friend said that i gotta upgrade the Bios. I will try that. If i get positive res ill post here.

 

Thank you for your advice.