Jump to content

Hey, quick question! Overclock

infiniteCurse
 Share
Posted
1 minute ago, Jurrunio said:

I read the voltage reading (vcore) on the fly with software. Not the most accurate way, but the same number reported with and without LLC should say that the CPU gets the samer amount of voltage under full load

If you are crashing because of voltage droop you will not see it in the software...because you are crashing before it displays the droop.

i9-9900k @ 5.1GHz || EVGA 3080 ti FTW3 EK Cooled || EVGA z390 Dark || G.Skill TridentZ 32gb 4000MHz C16

 970 Pro 1tb || 860 Evo 2tb || BeQuiet Dark Base Pro 900 || EVGA P2 1200w || AOC Agon AG352UCG

Cooled by: Heatkiller || Hardware Labs || Bitspower || Noctua || EKWB

Link to post
Share on other sites
Posted
2 minutes ago, TahoeDust said:

If you are crashing because of voltage droop you will not see it in the software...because you are crashing before it displays the droop.

the test can go on for a minute or so before the crash. Not a temperature issue either, the Cryorig R1 is going 80% fan speed all the time and temps peak at 70C.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
3 minutes ago, Jurrunio said:

the test can go on for a minute or so before the crash

I know. 

 

Keep doing it however you want.  I am just trying to make your life easier.  LLC is there for a reason.  You are skating uphill in my opinion.

 

Goodluck.

 

 

OP:  You have two people who have SUCCESSFULLY overclocked the 8700k on Asus boards, both recommending Lvl 6 LLC as a good place to start.  Check out that video @DarkSmith2 posted.  It is good info.

i9-9900k @ 5.1GHz || EVGA 3080 ti FTW3 EK Cooled || EVGA z390 Dark || G.Skill TridentZ 32gb 4000MHz C16

 970 Pro 1tb || 860 Evo 2tb || BeQuiet Dark Base Pro 900 || EVGA P2 1200w || AOC Agon AG352UCG

Cooled by: Heatkiller || Hardware Labs || Bitspower || Noctua || EKWB

Link to post
Share on other sites
Posted
7 minutes ago, Jurrunio said:

Not a temperature issue either, the Cryorig R1 is going 80% fan speed all the time and temps peak at 70C.

Run Prime95 for an hour and get back to me on those temps.

i9-9900k @ 5.1GHz || EVGA 3080 ti FTW3 EK Cooled || EVGA z390 Dark || G.Skill TridentZ 32gb 4000MHz C16

 970 Pro 1tb || 860 Evo 2tb || BeQuiet Dark Base Pro 900 || EVGA P2 1200w || AOC Agon AG352UCG

Cooled by: Heatkiller || Hardware Labs || Bitspower || Noctua || EKWB

Link to post
Share on other sites
Posted

Yes, there is nothing wrong with LLC on z370 (except that some strix boards had nonfunctional LLC when released but it got Bios fixed)..

On my old Asrock z68 Board and 2600k whats so ever it didnt worked well, well no setting worked besides the highest ^^ 

 

But with the current generation i can tell from my experience that LLC 6 works flawlessly, besides the very little overshoot.

 

If i set 1.235 it will end up using 1.248.

If i set 1.25 it will end up using 1.264.

 

Im fine with that and there is nothing wrong with using LLC at all.

 

CPU: Ryzen 7 5800x3D | MoBo: MSI MAG B550 Tomahawk | RAM: G.Skill F4-3600C15D-16GTZ @3800CL16 | GPU: RTX 2080Ti | PSU: Corsair HX1200 | 

Case: Lian Li 011D XL | Storage: Samsung 970 EVO M.2 NVMe 500GB, Crucial MX500 500GB | Soundcard: Soundblaster ZXR | Mouse: Razer Viper Mini | Keyboard: Razer Huntsman TE Monitor: DELL AW2521H @360Hz |

 

Link to post
Share on other sites
Posted
  • Author

HOLY COW! this is a bigger response then i imagined. lol. I'm starting fresh havent OC anything in my life. So LLC at 6, VOLTS at 1.25, and core set to 48 correct? Also what do i need to set everything to if i wanna OC to 4.9, if im feeling froggy? haha Thanks for the overwhelming response dudes and the help!!

Link to post
Share on other sites
Posted
3 minutes ago, infiniteblessing said:

@TahoeDust So, all i do is change the volts to 1.25, LLC to 6, and change core to 48 and thats it? I dont touch any other settings in Ai tweaker? haha nothing at all?

Follow this tutorial starting at 5 minutes, but instead of 5GHz and 1.35v he uses try 4.8GHz and 1.25v.  That should be a good start.

 

 

i9-9900k @ 5.1GHz || EVGA 3080 ti FTW3 EK Cooled || EVGA z390 Dark || G.Skill TridentZ 32gb 4000MHz C16

 970 Pro 1tb || 860 Evo 2tb || BeQuiet Dark Base Pro 900 || EVGA P2 1200w || AOC Agon AG352UCG

Cooled by: Heatkiller || Hardware Labs || Bitspower || Noctua || EKWB

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×