Guys i have a problem

[Rayqub]

Sorry if im posting somewhere i shouldn't

My problem is my computer that i just built doesnt send an image to the monitor and is stuck on the error code a9 when i press f1. However, it DID post ONCE and went into the bios and the monitor was running fine and showing an image.

 

 

Specs:

I7 7700k

Asus maximus ix formula 

16gb 4x4 corsair lpx ram

Gtx 1070 acx 3.0 

[AMDPRO]

1 minute ago, Rayqub said:

Sorry if im posting somewhere i shouldn't

My problem is my computer that i just built doesnt send an image to the monitor and is stuck on the error code a9 when i press f1. However, it DID post ONCE and went into the bios and the monitor was running fine and showing an image.

Has anything changed since then? Try to reseat CPU, Ram, and Graphics card. What are the specs?

[Rayqub]

Yes somethings changed, everytime i turned on the computer the monitor would flick on. Like if you see black on a screen its brighter than off so i know somethings going to it. But now the monitor doesnt turn on at all. I know for a fact every part works.

 Specs

I7 7700k

16gb ram corsair lpx

Gtx 1070 acx 3.0

Asus maximus ix formula

[Rayqub]

12 minutes ago, AMDPRO said:

Has anything changed since then? Try to reseat CPU, Ram, and Graphics card. What are the specs?

Yes somethings changed, everytime i turned on the computer the monitor would flick on. Like if you see black on a screen its brighter than off so i know somethings going to it. But now the monitor doesnt turn on at all. I know for a fact every part works.

 Specs

I7 7700k

16gb ram corsair lpx

Gtx 1070 acx 3.0

Asus maximus ix formula

 

[AMDPRO]

Try to test the monitor. See if that turns on when not connected to the PC, and then, if you have another PC or laptop, then hook that up.

[Rayqub]

1 minute ago, AMDPRO said:

Try to test the monitor. See if that turns on when not connected to the PC, and then, if you have another PC or laptop, then hook that up.

Yup the monitor works

[stefanDB]

try to boot the PC with as few components as possible, so only 1 RAM stick and no peripherals, HDDs or such

[Pidowap]

The A9 Q code on the motherboeard means the pc is booting

[AMDPRO]

44 minutes ago, Rayqub said:

Yup the monitor works

Try a different connector, and different ports on GPU

[Rayqub]

Ok so ive got everything working and windows started to install.

BUT, when installing the pc will reboot a few times, right? I have no clue if windows is finished installing because the monitor shows no signal from the display port. The q code now says A0.