Problem when booting new pc for first time

[Austinpspds]

I just built a pc, when booting it up for the first time i plug in windows 1 usb click 64 bit download then it just freezes to aorus logo

53688997877__5F151128-E126-498C-BA46-9C4B4EA1B1AF.MOV

[Zmax]

 

[johnukguy]

Did you set the BIOS to boot from USB before rebooting?

[Austinpspds]

9 minutes ago, johnukguy said:

Did you set the BIOS to boot from USB before rebooting?

I cant get to bios it switches to the logo before i can

[johnukguy]

Try a cold boot.

[Zmax]

1 minute ago, johnukguy said:

Try a cold boot.

Power off then wait 10s then Power on

[johnukguy]

Yes, unplug the power cable. wait a few seconds, plug it back in, turn on the power switch at the back and then power it back on at the front, just to be precise. 

[Zmax]

You can also reset the Cmos. Any change done to the Bios is made at the Cmos level. 

[Austinpspds]

7 minutes ago, johnukguy said:

Yes, unplug the power cable. wait a few seconds, plug it back in, turn on the power switch at the back and then power it back on at the front, just to be precise. 

Tried chat nothing changed, the motherboard says the error is 61 or NVRAM initialization

[johnukguy]

Then I'd suggest clearing the CMOS as ZMax suggested, and/or trying the RAM sticks in different slots, one at a time and see if it boots

[Austinpspds]

14 minutes ago, johnukguy said:

Then I'd suggest clearing the CMOS as ZMax suggested, and/or trying the RAM sticks in different slots, one at a time and see if it boots

I clicked f12 to get to boot menu before the logo appeared i chose windows 10 usb the clicked 64 bit now its frozen on windoes bootup logo

[Zmax]

It`s possible your usb key is not correct, try to make a new one

 

Windows installation take about  4 to 8 minutes before starting

 

You have to be patient

[rbrooks007]

Did you ever get a result on this??

I have the same...