Issue installing gpu

[Spicyman]

Hello all,

I’m in the midst of my first build and im having a killer time trying to get the gpu in the slot. It’s a NVIDIA gtx 1080 ti. When I try to put the card in I can see most the pins on the board (Asus rog rampage v edition 10) getting pushed back, but the pins towards the back of my case can’t get in. The case is a HAF 932 advanced. Pls help

[COUPER MILLAR]

Are you sure the pcie lock has been opened? 

 

Also never force anything. 

Edited December 22, 2017 by COUPER MILLAR
Force

[TrigrH]

Fans face down on the gpu, install into the top longest slot, remove the top 4 expansion covers on the case (just to be sure).

 

When installing make sure to go in sideways so the DVI port fits under then line it up, open the tab on the pcie slot and push it straight in. (board might flex a little)

 

screw the card down and the open expansion covers.

 

If you haven't installed motherboard stand offs, DO SO. < this is your issue.

[Godlygamer23]

Are you lining the card up correctly?

[ShoByte]

2 hours ago, wONKEyeYEs said:

Is this part getting hung up on the case?

 

 

This check, double check, and triple check. It's this most of the time. Or the card is catching on something inside the case.