MSI Tomahawk

[AlexWhi020]

So I decides to build an entire new PC, of which is working just fine, however when I did so I could not afford the GPU that I wanted so I used my existing GPU. MSI 1060

When I upgraded my GPU, and moved my 1060 into the old case I had no issues with anything up until this morning.
When I went to boot up the PC, the MOBo would not post. The LEDs on the board are indicating a BOOT problem.

I tried to reseat everything in the system to see if there were any issues with that. To no effect. I have removed the SSD and HDD and tried other ones, to no effect as well, Attemeted to boot the system with one stick of ram (The original ones and my new ones), and nothing happened. Same LED indicators.

Specs of the system with the boot issue,

MSI B350M Tomahawk
Ryzen 5 1600x
Corsair Vengeance RAM (2x8GB)
MSI 1060GTX Gaming X

If there are any tip or suggestions anyone may have, I am all ears. I cannot even get the system to light up a monitor right now, when it was working just fine a few days ago,

[Crunchy Dragon]

Have you tried moving the boot drive around and testing all the SATA ports to make sure it's not a dead port causing this problem?

[AlexWhi020]

I have, I have even tried to use the SSD from my new PC in all 4 ports to see if it was that. That was one of the first things I tried.