case modding or not

[asus killer]

I have this cheap case:

 

 

in the white version it's easy to see in the front the only ventilation, those 2 black strips on the side (there is nothing in the top or bottom for the air to get in) protected with a mesh. Is this enough? should i just go DiY on it and make some holes and put a mesh in the front? as a n00b i cannot see how the front fans can get fresh air with just those small "meshed" strips

 

[JaegerB]

Depends what you're putting in it. I'm guessing you aren't loading it full of GPUs and other high heat components, so that will be enough. 2 fans in, one out will be enough for airflow. If you're really worried or your temps turn out to be high, that case has a top fan bracket so you could even install a third pulling in.

[asus killer]

no, it's just a rx 470 and an i5 non OC. thanks will leave it as is then. I only have a front and a rear fan, will put one more in the front then.

[TrigrH]

2 minutes ago, asus killer said:

no, it's just a rx 470 and an i5 non OC. thanks will leave it as is then. I only have a front and a rear fan, will put one more in the front then.

move the rear fan to the front

[asus killer]

8 minutes ago, TrigrH said:

move the rear fan to the front

a fan is cheap, i don´t mind buying one. 

You suggest i leave the back without fans? would that not be worst?

[TrigrH]

Just now, asus killer said:

a fan is cheap, i don´t mind buying one. 

You suggest i leave the back without fans? would that not be worst?

should give positive pressure and help keep dust out

[Ruffleduffle]

u dont really need a fan pulling air out in your situation, it will find its own way

[asus killer]

ok, thanks 

[asus killer]

before i mess with it i decided to take some temperatures. max 69 on the cpu, 67 on the gpu, while gaming middle earth shadow of war, pretty max out settings. Are this ok?