Jump to content

Questions about replacing hardware...

Hey guys. What should I do after I replaced hardware on my pc? Do I need to do any changes on operating system or software? I know that if I change hard drive, I need to reinstall operating system, but what about motherboard? Do I need to adjust the booting?

 

Hope you guys can help me to answer these questions, and btw, thank you all so much. :-) 

Ya. My English isn't very good. I'm not really good in talking English but I'm learning...You making fun with my English, so WHAT??? You get what?? You can just correct the people and this is better than laugh at the people...

Link to comment
https://linustechtips.com/topic/846930-questions-about-replacing-hardware/
Share on other sites

Link to post
Share on other sites

4 minutes ago, Himommies said:

Reinsatll drivers and your good to go

(for graphics driver use DDU)

Can I install hardware without driver? And what is DDU? Thank you~

Ya. My English isn't very good. I'm not really good in talking English but I'm learning...You making fun with my English, so WHAT??? You get what?? You can just correct the people and this is better than laugh at the people...

Link to post
Share on other sites

It depends what you've replaced. If you replace the motherboard you don't really need to change anything (unless you've overclocked the CPU or changed anything in the bios, then you'll need to re-apply the changes)

 

You also should download your chipset drivers and reccomended drivers for your motherboard.

 

 

Also, is that your KTM I see in your prof pic?

Main Rig

CPU: Ryzen 2700X 
Cooler: Corsair H150i PRO RGB 360mm Liquid Cooler
Motherboard: ASUS Crosshair VII Hero
RAM: 16GB (2x8) Trident Z RGB 3200MHZ
SSD: Samsung 960 EVO NVME SSD 1TB, Intel 1TB NVME

Graphics Card: Asus ROG Strix GTX 1080Ti OC

Case: Phanteks Evolv X
Power Supply: Corsair HX1000i Platinum-Rated

Radiator Fans: 3x Corsair ML120
Case Fans: 4x be quiet! Silent Wings 3

 

 

Link to post
Share on other sites

Just now, Armakar said:

It depends what you've replaced. If you replace the motherboard you don't really need to change anything (unless you've overclocked the CPU or changed anything in the bios, then you'll need to re-apply the changes)

 

You also should download your chipset drivers and reccomended drivers for your motherboard.

 

 

Also, is that your KTM I see in your prof pic?

Oh OK I see. And that RC isn't mine HAHA. I found this pic online and it looks so nice so I use it as prof pic. Thank you~

Ya. My English isn't very good. I'm not really good in talking English but I'm learning...You making fun with my English, so WHAT??? You get what?? You can just correct the people and this is better than laugh at the people...

Link to post
Share on other sites

Just now, Alexsolo said:

Are you using Windows 10?

Yup.

Ya. My English isn't very good. I'm not really good in talking English but I'm learning...You making fun with my English, so WHAT??? You get what?? You can just correct the people and this is better than laugh at the people...

Link to post
Share on other sites

when upgrading the hard drive you can clone your operating system to another drive and then boot from that.   there's software you can download that will do it. research cloning and migrating hard drive.  as for the motherboard, I like doing a fresh install. there might be some residual uninstalled drivers that you might miss that might conflict with your new motherboard. your windows license is tied to your motherboard. if your using an OEM operating system. you would have the get a new key but you can get a cheap key on ebay for around 10$        

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×