PRE-BUILD PC QUESTION

[etari]

Hello guys , how do you rate this build ?

 

I know that PSU / SSD isn't the best there is but will it do the work ? it comes pre-build like 200euros cheaper if i were building it my self with same parts.

 

Long story short , this builds parts :

 

PSU - AMD Ryzen 7 1700

MOBO - MSI B350M MOTOR AM4, 4xDDR4, 4xSATA3, HD Audio, 2-Way AMD® CrossFire™

RAM - ADATA XPG DDR4 8gb 3000Mhz CL16 1.2V with aluminum heat spreader

SSD - Silicon Power S55 SSD 240GB 2.5" SATA III 6Gbps 550/450MB/S

GPU - Zotac Geforce GTX 1070 Founders Edition 8GB Engine Clock (Boost):1683 MHz, Memory Clock: 8 GHz, 3 x DisplayPort 1.4, HDMI 2.0b , DL-DVI

CASE - X2 Spitzer

PSU - Inter-Tech Energon 650W 82% Efficiency at typical load, EPS AC 220-240V, 50/60Hz, DC 3.3/5/±12V

 

it comes in total for 999$

[HKZeroFive]

It's not a bad deal for a prebuilt but the power supply is hot garbage. I'd try and replace that at the very least.

[etari]

7 minutes ago, HKZeroFive said:

It's not a bad deal for a prebuilt but the power supply is hot garbage. I'd try and replace that at the very least.

yea the PSU looks like garbage to me , i was thinking maybe i should just save and get ryzen 5 1600 with 1060 6gb instead hmmm...it's fairly like 200 euros different hmm...i know this build would last me ages heh

[seon123]

Definitely change the motherboard and PSU. 

[etari]

Just now, seon123 said:

Definitely change the motherboard and PSU. 

what's wrong with this specific mobo ?

[seon123]

7 minutes ago, etari said:

what's wrong with this specific mobo ?

Bad BIOS, crappy VRMs. For a 1700, you want a decent board, especially when you're overclocking. 

[etari]

Just now, seon123 said:

Bad BIOS, crappy VRMs. For a 1700, you want a decent board, especially when you're overclocking. 

i dont think i ever plan to overclock stuff  , i dont have any clue how to do that , and dont want any aditional stress on the computer it self 

[seon123]

2 minutes ago, etari said:

i dont think i ever plan to overclock stuff  , i dont have any clue how to do that , and dont want any aditional stress on the computer it self 

Then why get a B350 board in the first place? Why not save the money and get an A320 board for cheaper?

Overclocking is easy, and you should do it. And also get a decent board

[etari]

Just now, seon123 said:

Then why get a B350 board in the first place? Why not save the money and get an A320 board for cheaper?

Overclocking is easy, and you should do it. And also get a decent board

i guess you havent read my tittle , it's PRE-BUILD PC , i might contact the official seller , they might replace some parts with the one's i want but i'm not sure it's going to happen , thats why i'm asking here about this PRE-BUILD PC

[etari]

2 minutes ago, seon123 said:

Then why get a B350 board in the first place? Why not save the money and get an A320 board for cheaper?

Overclocking is easy, and you should do it. And also get a decent board

it's like 200 euros cheaper pre-build , then if i buy the same exact parts so yeah

[etari]

any other opinions about this specific build?