PETG Build

[Jazek]

First of all im from spain so i may make some spelling errors ?, its my first custom loop but im going hard anyways so i dont want to expend extra money spending first soft tubing and soft fittings.

 

These are the parts:

 

EK SUPREMACY EVO
EK PE 240
EK-XRES 100 SPC-60
EK-RES X3 204MM (I want to change the small reservoir that comes with the spc 60)
EK-HD PETG 10/12 X2
EK-HDC FITTING 10/12MM X7
MAYHEMS RED PASTEL 1L
CORSAIR SP120  RED LED 57CFM X2 
XSPC PETG CUT KIT (I dont know if i can use the silicone with the 10mm ID tubing )

 

For draining i will use a T splitter directly next to the pump with an extender. Then i will put one extender with the draiming valve and on the other side i will put a fitting and the tube.

 

Draining parts:
EK-AF T SPLITTER 
EK-AF EXTENDER 6MM X2
EK-AF VALVULA

 

 

Is everything ok or am i missing something?

[LyondellBasell]

55 minutes ago, Jazek said:

First of all im from spain so i may make some spelling errors ?, its my first custom loop but im going hard anyways so i dont want to expend extra money spending first soft tubing and soft fittings.

 

These are the parts:

 

EK SUPREMACY EVO
EK PE 240
EK-XRES 100 SPC-60
EK-RES X3 204MM (I want to change the small reservoir that comes with the spc 60)
EK-HD PETG 10/12 X2
EK-HDC FITTING 10/12MM X7
MAYHEMS RED PASTEL 1L
CORSAIR SP120  RED LED 57CFM X2 
XSPC PETG CUT KIT (I dont know if i can use the silicone with the 10mm ID tubing )

 

For draining i will use a T splitter directly next to the pump with an extender. Then i will put one extender with the draiming valve and on the other side i will put a fitting and the tube.

 

Draining parts:
EK-AF T SPLITTER 
EK-AF EXTENDER 6MM X2
EK-AF VALVULA

 

 

Is everything ok or am i missing something?

Are you cooling your graphics card as well?

[Jazek]

1 hour ago, LyondellBasell said:

Are you cooling your graphics card as well?

no just the cpu but im planning to watercool my gtx 970 sli in the future

[LyondellBasell]

55 minutes ago, Jazek said:

no just the cpu but im planning to watercool my gtx 970 sli in the future

Cool.

 

As far as I can tell, you have pretty much everything. It's usually advised to make sure you have some gloves for the heat gun.

Depending on your confidence in your skill level and craftsmanship, you may want to pick up another pack of the tubing as well.

If you don't need it you can save it for later.

Nothing sucks more than having to stop a build close to completion because you made a few mistakes on some of the bends and ran out.

[Jazek]

7 minutes ago, LyondellBasell said:

Cool.

 

As far as I can tell, you have pretty much everything. It's usually advised to make sure you have some gloves for the heat gun.

Depending on your confidence in your skill level and craftsmanship, you may want to pick up another pack of the tubing as well.

If you don't need it you can save it for later.

Nothing sucks more than having to stop a build close to completion because you made a few mistakes on some of the bends and ran out.

Thats why im planning on buying two pairs of 500mm petg tubing, ty for the recommendation

[PPCs-Matt]

Looks great to me, only thing I might consider is using a rotary extension such as this one for your drain setup. That way you can rotate the drain and/or T fitting. 

[vESP]

On 9/18/2017 at 4:00 AM, PPCs-Matt said:

Looks great to me, only thing I might consider is using a rotary extension such as this one for your drain setup. That way you can rotate the drain and/or T fitting. 

my firewall flagged that Wow. 

[PPCs-Matt]

18 hours ago, vESP said:

my firewall flagged that Wow. 

Yes, I apologize, our site did get flagged for Malware but the issue has been resolved, and we are just waiting for Google to re verify our website. 

[Jazek]

I just received the cpu block and the radiator, im going to rinse the radiator with destiled water but i dont know if I have to flush  the cpu block and the pump too. Can anyone help me? which parts from the custom loop do I have to rinse?

[AMDNeko]

26 minutes ago, Jazek said:

I just received the cpu block and the radiator, im going to rinse the radiator with destiled water but i dont know if I have to flush  the cpu block and the pump too. Can anyone help me? which parts from the custom loop do I have to rinse?

Unless you bought something like the Mayhems blitz kit then just go to bath or sink fill the rads with some water and shake it around drain and repeat until no black stuff comes out. Everything else is fine~

[Jazek]

21 hours ago, PPCs-Kat said:

Unless you bought something like the Mayhems blitz kit then just go to bath or sink fill the rads with some water and shake it around drain and repeat until no black stuff comes out. Everything else is fine~

ok thank you, I will fill the rad with destiled water 

[Limecat86]

52 minutes ago, Jazek said:

ok thank you, I will fill the rad with destiled water 

You can use tapwater for cleaning it.

First, fill it halfway and hold your thumbs on the openings while shaking it firmly.

Then, if there is no more stuff coming out, rinse it a few more times with distilled water.