Boot problem after re-doing cablemanagement

[Luukvnuenen]

So i've ascended to the master race aproximately 4 weeks ago and everything was well and good. Problem was that is wasn't happy with the cable management so i decided to redo it. 

 

Well everything nice and well you'd think.

 

Having closed up my case and turning on my pc to watch its glorious being in action i found out that my pc wasnt booting anymore and i get the cpu notification light on my motherboard.

 

The specs that i am currently rocking are:

Gigabyte ab350 motherboard

16gb corsair vengeance 3200mhz

Ryzen 1600

Gigabyte gtx 1070

250gb samsunv evo ssd

2 tb western digital hdd

 

I have allready checked both ends of the cpu and gpu cables as well as the sata en power cables from my hard drives and ssd (because i unplugged and plugged the ssd back in so i could route the cables better). Besides that the only thing i unplugged is the motherboard power cable also to reroute this.

 

If someone has anything i could check before i have to take it out outside of the case and check the barebones system would be greatly appreciated

[Colin Donoghue]

Have you tried shorting the power button pins on the mother board front panel connector header

[Luukvnuenen]

5 minutes ago, Colin Donoghue said:

Have you tried shorting the power button pins on the mother board front panel connector header

Yeah well all the fans start moving and i get the lights so should this help brcause my computer does start it just wont boot?

[Colin Donoghue]

1 hour ago, Luukvnuenen said:

Yeah well all the fans start moving and i get the lights so should this help brcause my computer does start it just wont boot?

Check the error number on the board and look for it in the mother board  manual 

[Luukvnuenen]

15 hours ago, Colin Donoghue said:

Check the error number on the board and look for it in the mother board  manual 

As i allready said in the original post is that i get an indicating light that there is a problem with the cpu

[Luukvnuenen]

Well i uninstalled everything and plugged everything back in and it is now working again!! Some cable must have been lose or something. Anyhow thanks for the help!