Corsair spec 01

[Gannon59]

I'm gathering parts for my first build

I'm using pcpartpicker.com 

The case I'm using is a corsair spec 01 

I would like to use the Kracken x52

The site says it is not compatible with case I believe it will fit in the front of case any body use this case is a build?

[Gannon59]

I believe the drive cage can be removed.

I'm pretty sure there will be room

[RadiatingLight]

3 minutes ago, Gannon59 said:

I believe the drive cage can be removed.

I'm pretty sure there will be room

there won't be room

corsair.com says it only has 120mm AIO support.

[Gannon59]

OK the site also says that you can mount 2-140mm fans in the front

Just thought being that the Kracken x52 Rad is 275 x 123 x 30 

Sounds like it should work.

[xGGAx]

Im using the spec03 which is very similar. It does fit if you remove the drive cage. There is plenty of room for a push/ pull config if you want.

https://www.overclock3d.net/reviews/cases_cooling/corsair_carbide_spec_01_03_review/6

 

The top mount is a bit trickier. It depends on your motherboard and ram height.
The reason Corsair says "120mm only" is just to play safe.