Need help!

[rans]

Pc won't boot
the fans will run but no display and led from keyboard not responding
already tried to switch ram and change slots all combination.
and i notice that after 10 seconds of powering up the system will shutdown (lights will turn off and fans) then it will quickly boot up again but still no display.
i've already tried 2 psu to test but both the same result.

[rans]

the motherboard is asrock h110 hdv and g4560
4gbx2  of ddr4 ballistix sport 

[Billy_Mays]

It's boot looping plug everything back in properly 

[rans]

Just now, Billy_Mays said:

It's boot looping plug everything back in properly 

uhm the stop is only happening once. 
i've even tried no ram and got no beeps but the stop after 10 sec still happening. 

[Arcanekitten]

Might help. 

Probably the motherboard. If you have  beep speaker plug it in and see if it beeps a pattern.

[rans]

7 minutes ago, Arcanekitten said:

Might help. 

Probably the motherboard. If you have  beep speaker plug it in and see if it beeps a pattern.

I'm not getting any beep T_T i'll try to read thank you for the link

 

[Billy_Mays]

13 minutes ago, Ranz said:

uhm the stop is only happening once. 
i've even tried no ram and got no beeps but the stop after 10 sec still happening. 

Even the power connectors (CPU, mobo, GPU, storage)

[rans]

yes the first thing i do was unplug the hdd, the audio/usb connector coming from case and only use the 24pin and the 4pin of usb attach in motherboard.
already tried 2 psu. and different rams and different slot. even tried to remove cmos battery. and i am not getting any beep. and all test have the result of powering off then quickly starting again.
currently now i am trying to reseat and try different processor.
hope this work.

[Billy_Mays]

4 minutes ago, Ranz said:

yes the first thing i do was unplug the hdd, the audio/usb connector coming from case and only use the 24pin and the 4pin of usb attach in motherboard.
already tried 2 psu. and different rams and different slot. even tried to remove cmos battery. and i am not getting any beep. and all test have the result of powering off then quickly starting again.
currently now i am trying to reseat and try different processor.
hope this work.

It might be but CHECK the pins on the mobo

[rans]

Just now, Billy_Mays said:

It might be but CHECK the pins on the mobo

you mean the cpu socket pins?
uhm there are too many and small pins is there any possible or easier way to check or to see which is wrong?

[Billy_Mays]

1 minute ago, Ranz said:

you mean the cpu socket pins?
uhm there are too many and small pins is there any possible or easier way to check or to see which is wrong?

Yes shine a light on it and look from different angles if there is no bent pins it should be find but test with a different CPU 

[rans]

8 minutes ago, Billy_Mays said:

Yes shine a light on it and look from different angles if there is no bent pins it should be find but test with a different CPU 

i tried to see several times and even use a phone to see bigger but i can't see any bent pins

will try to replace processor. 

[rans]

After changing the processor still no display/beep but the shutdown after 10 sec and power up ddnt happen anymore.

[Billy_Mays]

6 minutes ago, Ranz said:

After changing the processor still no display/beep but the shutdown after 10 sec and power up ddnt happen anymore.

Ok it's a faulty CPU return it asap and what CPU is it?

[rans]

Uhm okay here is some result
CPU - g4560
no beep at all and shutting down after 10 seconds and starts to power up but both do not have display or POST.
CPU - celeron g3900
i did not get any beep at first then i tried removing ram and then i did have a beep. 
after it i tried to return the ram but still no display no beep.
and i tried to put some gpu as i was thinking this might be the same with my first issue 

so i think asrock is some piece of shit. all of this item is still in warranty but for sure the store will always say that it has bent pins again and will void the warranty.

[kelvinhall05]

You need to update the BIOS on that board to use Kaby Lake CPUs in it.

[rans]

2 minutes ago, kelvinhall05 said:

You need to update the BIOS on that board to use Kaby Lake CPUs in it.

Actually it was working before and just got stuck for like 1 week of no use. i bought it kaby lake ready already.

[kelvinhall05]

2 minutes ago, Ranz said:

Actually it was working before and just got stuck for like 1 week of no use. i bought it kaby lake ready already.

Can you boot into your BIOS?

[rans]

2 minutes ago, kelvinhall05 said:

Can you boot into your BIOS?

yes i can now use the pc but only with GPU present.

[Billy_Mays]

48 minutes ago, Ranz said:

yes i can now use the pc but only with GPU present.

You need to update your bios that's it